catalogue search
P. 01
P. 02
P. 03
P. 04
|
|
|
|
You may also be interested in
Dew-point meter, Ultrasonic detector, Air dryer, Portable flow-meter, Pipe
Text version of the page
| DRYPOINT® M | ||||||||||||||||||||||||||||||||||
| SIMPLE AND EFFECTIVE | ||||||||||||||||||||||||||||||||||
| CLEARPOINT® Housing model: O Compressed air runs through the core pipe, and is then diverted to the membrane element in the ground area. The compressed air, which is still humid, flows through the sharply selective hollow fiber membranes of the membrane element inside. © The purge air, required for drying, diverges continuously at the outlet area of the membrane element, and is expanded atmospherically using a defined nozzle orifice. Due to this expansion, the purge air becomes significantly dryer, as humidity contained in the compressed air now fills the expanded volume. The dry purge air passes the exterior of the membrane fibers. © As a result, two air flows with a different moisture content move in reverse flow through the membrane element, separated only by the membrane wall. Inside the membranes, humid compressed air flows and dry purge air passes outside. On account of the varying moisture content, moisture from the compressed air diffuses into the purge air. As regards the drying procedure, use of the TWIST 60 technology results in maximum efficiency. O Compressed air is dry when leaving the membrane element. © Humid purge air is released into the environment. | ||||||||||||||||||||||||||||||||||
| =£>= Humid compressed air | ||||||||||||||||||||||||||||||||||
| =£>= Purge air | ||||||||||||||||||||||||||||||||||
| Quality class in accordance with ISO 8573.1 Class 6 | ||||||||||||||||||||||||||||||||||
| Pressure dew point + 10°C | ||||||||||||||||||||||||||||||||||
| Along with filtration, compressed air drying contributes significantly to the enhancement of process reliability. Humidity in compressed air systems causes corrosion, and promotes the growth of micro-organisms. In individual cases, condensate emerges at the point of collection. This represents a permanent risk with regard to the industrial process, e.g. due to failing pneumatic controls, increased wear and tear, or other problems with the production process. DRYPOINT® M membrane dryers constitute part of the extensive BEKO TECHNOLOGIES dryer program for compressed air processing. We would be happy to give you more advice should you require it. | ||||||||||||||||||||||||||||||||||
| Class | ||||||||||||||||||||||||||||||||||
| +7°C | ||||||||||||||||||||||||||||||||||
| 5 | ||||||||||||||||||||||||||||||||||
| Refrigeration dryer DRYPOINT'R | ||||||||||||||||||||||||||||||||||
| Class | ||||||||||||||||||||||||||||||||||
| 4 | +3°C | |||||||||||||||||||||||||||||||||
| m3/h | ||||||||||||||||||||||||||||||||||
| Class | ||||||||||||||||||||||||||||||||||
| 3 | -20°C | |||||||||||||||||||||||||||||||||
| Adsorption dryer DRYPOINTAC | ||||||||||||||||||||||||||||||||||
| Class 2 -40° C | ||||||||||||||||||||||||||||||||||
| Class | ||||||||||||||||||||||||||||||||||
| -70° C | ||||||||||||||||||||||||||||||||||