DRYPOINT AC Volume flows 135 - 1.550 m³/h - BEKO TECHNOLOGIES - #7

Maximum operating overpressure

Type AC 205 - AC 250: 16bar Type AC 260 - AC 295: 10 bar (16 bar optional)

Higher nominal output on request.

Pressure dew point default setting (outlet)

Optional pressure dew points

Inlet temperature air

Ambient temperature

Electric power supply (other voltages on request)

Input filter

Output filter

-40°C

-20 °C / -70 °C min./max. 2°C / 50°C min./max. 5°C / 50°C min./max.

24 VDC 0,01pm 1,0 pm

Regeneration air nozzle decompres­ses separated partial

stream to

atmospheric pressure

CLEARPOINP dust filter

DRYPOINT® AC are cold-regenerated adsorption dry­ers which function using the alternating pressure method.

Two containers, filled with strongly hygroscopic dry­ing agents, are placed in parallel with each other. While compressed air is dried in one of these contai­ners, regeneration of the drying agent takes place in

the other. In a defined rhythm, a time dependent con­trol switches over from one container to the other.

Drying agent bed adsorbs humidity

CLEARPOINT® input filter and electronically level-controlled condensate drain BEKOMAT® 20 FM with filter manage­ment

Regeneration air,

enriched with humidity,

is released to the

environment via silencers

Performance date according to DIN ISO 7185 relate to an input pressure of 7 bar (overpressure) and an inlet temperature of 35°C. Please multiply with the corrective factors where the input conditions deviate.