Catalogue - Clearpoint® - BEKO TECHNOLOGIES - (Version JPG)

See other catalogues for BEKO TECHNOLOGIES

Pipe, Condensate treatment unit, Dryer, Ultrasonic detector, Drain

Text version of the page

CLEARPOINT

,. CONVINCING IN DETAIL

Condensate from compressed-air filtration is nearly always aggressive, so that unprotected housings would be exposed to corrosion.

CLEARPOINT® filter housings are

made of seawater-resistant aluminium

and are additionally anodised inside. This offersincreased corrosion

protection, while the permanently smooth surface also reduces the flow resistance.

1000 h 800 h 600 h 400 h 200 h

BEKO INNOVATION

1999 2000

Aluminium Aluminium chromated

2001 Alum n um

with KTL coating

2002

Seawater resistant aluminium, anodised

The closing mechanismis a safety feature that allows 100 % control during opening of the filter housing. If the housing is opened while still under pressure, an audible warning signal will be given.

The standard needlefelt drainage layer has a high thermostability (up to 120 °C) compared with the foamed plastic used in other filter products. It is also chemically and mechanically highly resistant and free of silicone. Combined with the reliable construction, the filter element is absolutely safe against an expansion or damage to the drainage layer. A continual use of the whole filter surface is thus realised.


	m	H


		I ♦*
	um

Conventional types

BEKO

Clearpoint® - BEKO TECHNOLOGIES - #4

Pipe, Condensate treatment unit, Dryer, Ultrasonic detector, Drain