SPECIAL SOLUTIONS FOR HEAVY DUTY APPLICATIONS

REDUNDANT SIGNALS APPLICATIONS

Signals redundancy solutions to ensure the continuous operation of the installation, provide commutation channels or different signals to several subsequent electronics.

DOUBLE OR TRIPLE MOUNTING

58mm encoders duplex/triplex mounting 90mm encoders duplex/triplex mounting

Solid shaft version Solid shaft version 6 to 14 mm 11 and 12 mm

58mm encoders duplex/triplex mounting 90mm encoders duplex/triplex mounting

Through shaft version Through shaft version 6 to 14 mm 12 to 30 mm

58mm encoders combination : incremental, absolute single-turn, absolute multi-turn 90mm encoders combination : incremental, absolute single-turn, absolute multi-turn, tacho-encoder, optotacho DOUBLE INCREMENTAL ENCODER DOUBLE OPTICAL / ELECTRONICPART Shaft Electronic Resolution Connection

Double output

ROBUSTECH™

Solid . 5 V RS422

90mm

11 mm . 11-30V supply, out : 5V RS422 M23 12 pinouts . 11-30V push-pull 1024 max. PVC cable

GHM9

12 mm . transistorized 11-30 V push-pull PUR cable

OVERSPEED FUNCTION WITH CENTRIFUGAL SWITCH

Sturdyassemblyof encoder and mechanical overspeed switch Modular mounting Security overspeed system, works without power supply Radial commutation centrifugalswitch without permanent contact Excellent repeatability Also available on single/multi turn absolute encoders

INCREMENTAL ENCODERS WITH MECHANICAL OVERSPEED Shaft Overspeed Electronic Resolution Radial connection

. 4,5 – 5,5Vsupply, out :5V RS422 - TTL M23 12 pinouts

ROBUSTECH™

Solid . 11-30V supply, out :5V RS422 - TTL PVC cable

90mm

11 mm 800-3000 rpm . 11-30 push-pull 10 000ppr PUR cable . transistorized 11-30V push-pull max.

GHM9

12 mm . 15-30V suppy, out :regulated 12 V 4 pinouts solenoid valve . 11-30V push-pull,150 mA/channel connector for the overspeed . 4,5 – 5,5Vsupply, out :5V RS422 - TTL M23 12 pinouts

ROBUSTECH™

Blind . 11-30V supply, out :5V RS422 - TTL PVC cable

90mm

Up to 800-3000 rpm . 11-30 push-pull 10 000ppr PUR cable . transistorized 11-30V push-pull max.

GHU9

20mm . 15-30V suppy, out :regulated 12 V 4 pinouts solenoid valve . 11-30V push-pull,150 mA/channel connector for the overspeed

HIGHLOAD COUPLING DEVICE (for high radial and axial loads)

With compatible DHM5 flange: ref. MPAL58 With compatible GHM9 flange: ref. MPAL 11/12