puller 2 - BEGA - #1

Text version of the page

PULLING TOOLS 2 BETEX for reliable rotation in maintenance and production S P E C I A L TOOLS ANNO 1978 ® BETEX 62 Internal expander-puller up to a bore of Ø 150 mm This special expander system has been developed to facilitate rapid and effective dismantling under difficult conditions, e.g. in ‘blind holes’. The multiple adjustable jaws (up to 6) ensure the correct grip from behind the bearing, bush etc. Bearings, bushes, sealings etc. are extracted effortlessly. Smaller, larger and longer sizes are available on request. BETEX 56 Internal 4-arm bearing pullers with interchangeable claws (in case) for total 66 bearings till Ø105 mm This four-arm bearing puller has been specially developed to extract ball-bearings from casings and shafts using a single action. This concerns the 6000, 6200, 6300 and 6400 series. 66 different ball-bearings can be removed with these three sets of pullers. BETEX 54 Patented 2-arm pullers for diameter Ø40 mm till Ø350 mm This 2-arm puller is extremely well-suited to applications involving the extraction of bearing-rings, innerrings (NU-NJ). Reversal of the arms makes internal dismantling also possible. The self-locking system guarantees that the arms will not deflect. Extended and extra-extended arms can be supplied for long shafts. BETEX 52 Patented self-centering 3-arm pullers (mechanical and hydraulic) for diameter Ø40 mm till Ø640 mm The 3 arms of these pullers adjust themselves simultaneously and symmetrically, inwards or outwards. There is no possibility of the arms bending or deflecting. Hydraulic screws with a 20 ton capacity are available for use in combination with the two largest pullers. The thread of the screws is in no way affected by the building up of hydraulic pressure, thus keeping wear and tear to the screws down to a minimum.