XMP i - BD SENSORS - #1

Text version of the page

BD SENSORS GmbH BD-Sensors-Straße 1 Telefon +49 (0) 92 35 / 98 11- 0 www.bdsensors.com D - 95199 Thierstein Telefax +49 (0) 92 35 / 98 11- 11 info@bdsensors.de XMP i Precision Pressure Transmitter for Process, Chemical and Petrochemical Industry DESIGN The basis of XMP i is our piezoresistive silicon sensor DSP 111 (flush-welded diaphragm) or the sensor DSP 411 (internal mounting diaphragm). The sensor is – together with digital compensation electronics – directly mounted into the pressure port. It is connected to the configurable HART. module via a I2C interface. With the help of this innovative housing concept, precise and long-term stable pressure transmitters with flush-welded diaphragm and low thermal error can be produced. OPERATING The device is as a standard equipped with HART. communication. It is thus possible to set and transfer a variety of parameters via PC, HART. communicator, etc. An intelligent display and operating module is optionally available. Thus, the current pressure can be displayed and the transmitter can be easily configured onsite via three buttons. Characteristics . accuracy: 0.05 % FSO BFSL (0.1 FSO IEC 60770) . turn-down 1:10 . several process connections: - thread (inch, NPT) - flange (DIN 2501, ANSI) - DRD . high ingress protection IP 67 . optionally: - with integrated display and operating module - cooling element for media temperatures up to 300 °C - flameproof enclosure (in preparation) - PROFIBUS PA (in preparation) XMP i Precision Pressure Transmitter . Ex-intrinsically safe version with HART.-communication . internal or flush welded diaphragm . rugged aluminium die cast case or stainless steel field housing . nominal pressure ranges from 0 … 350 mbar up to 0 … 600 bar