Text version of the page

P 6

Programming Device for Pressure Switches DS 4 and DS 6

simple programming independent of a PC quick connection between supply and pressure switch up to five configurations storable and copyable all parameters of the pressure switch can be configured (switching mode, switch-on and switch-off point, ...)

The programming device P 6 has been developed especially for configuration of our pressure switches in situ, without PC or laptop. The programming device has to be connected between supply and pressure switch only. It can be used with pressure switches series DS 4 and DS 6. When designing the programming device P 6 user-friendliness was emphasized. The individual functions can be set using a closed menu system via two miniature push buttons on the front. All settings are permanently stored in an EEPROM and can be transferred to other pressure switches. Additionally, applied reference pressure can be “taught” as switch-on or switch-off points. robust plastic housing 4-digit LED-display (digit size 7 mm) comfortable configuration of the parameters via two miniature push buttons and LED display 2 switch-on and switch-off points adjustable 27 menu functions for configuration and displaying several parameters ingress protection IP 65
Characteristics P 6 Programming Device BD SENSORS GmbH BD-Sensors-Straße 1 Telefon +49 (0) 92 35 / 98 11- 0 www.bdsensors.com D - 95199 Thierstein Telefax +49 (0) 92 35 / 98 11- 11 info@bdsensors.de