Text version of the page

LMP 307

Stainless Steel Probe with Stainless Steel Sensor

diameter: 27 mm level measurement in water, fuel and diesel oil nominal pressure ranges from 0 ... 1 mH

2

O up to 0 ... 250 mH

2

O (0 ... 100 mbar up to 0 ... 25 bar)

The submersible level transmitter LMP 307 has been designed for continuous fluid level measurement in water and clean to slightly contaminated media. Housing material is 1.4571 (316Ti); the sensor diaphragm is made of 1.4435 (316L). Standard sealing material is FKM; other materials are available on request. Due to the high-value piezoresistive stainless steel sensor the submersible probe LMP 307 features an excellent line- arity and good long term stability. On the basis of the excellent metrological features of the stainless steel sensor it is possible to manufacture the submersible probe with accuracy of 0.05% FSO BFSL. In addition the several cable materials (PVC, PUR and FEP) the customer has the possibility to consider different versions of cable protection. The submersible probe is suited for explosive area (zone 0). Preferred areas of use are: small thermal effect excellent linearity good long term stability accuracy: 0.175 / 0.125 / 0.05% FSO BFSL (0.35 / 0.25 / 0.1 FSO IEC 60770) option Ex version: (only with 4 … 20 mA / 2-wire) TÜV 03 ATEX 2006 X option cable protection with corrugated pipe customer specific versions: - special pressure ranges environmental engineering: water supply, sewage treatment
Characteristics depth or level measurement in wells and open waters ground water level measurement
LMP 307 Stainless Steel Level Transmitter level monitoring in open tanks
BD SENSORS GmbH BD-Sensors-Straße 1 Telefon +49 (0) 92 35 / 98 11- 0 www.bdsensors.com D - 95199 Thierstein Telefax +49 (0) 92 35 / 98 11- 11 info@bdsensors.de