Battery Powered Digital Pressure Gauge
standard version: piezoresistive stainless steel sensor low cost version: ceramic sensor nominal pressure ranges from 0 ... 100 mbar up to 0 ... 600 bar
Description The battery powered digital pressure gauge rugged, rotatable plastic housing has been specially de-signed for applications in hydraulics and pneumatics. It could be installed easily and quickly in situ. The display module is continuously rotatable so that a clear readability is guaranteed even in unusual installation positions. 4.5 digit LC display for showing the measured value (digit height 11 mm) 6-digit additional display for the unit (digit height 7.5 mm) easy configuration via three push buttons Operation The device can be operated menu-driven via three pushbuttons in the touchpad. Besides showing information about the nominal pressure range as well as minimal and maxi-
mal pressure of the process, several pressure units (bar, mbar, PSI, mWs, inHg, cmHg, mmHg, kPa, MPa) and the posi-tion of decimal point can be set. Upper and lower range of the measured range can be recalibrated by the customer. Defaults can be loaded again via menu. accuracy: 0.125 / 0.250 % FS BFSL (0.25 / 0.50 % FS IEC 60770) ingress protection IP 65 mechanical connection - G1/2“ EN 837 - G1/4“ EN 837 - 1/2“ NPT - 1/4“ NPT Applications
Characteristics hydraulics pneumatics mechanical engineering
Digital Pressure Gauge BD SENSORS GmbH BD-Sensors-Straße 1 Telefon +49 (0) 92 35 / 98 11- 0 www.bdsensors.com D - 95199 Thierstein Telefax +49 (0) 92 35 / 98 11- 11 info@bdsensors.de
