Model A2
2Pages

Catalog excerpts

Model A2 Heavy Duty Signal Conditioner Model A2 is a Sensor Signal Conditioner (SSC) for heavy duty application. This SSC is suitable for any sensor or transducer which is based on Wheatstone bridge circuit. In application, when connected to power supply (supply voltage can be 12, ..., 24 Vdc), this A2 SSC provides a constant excitation voltage to Wheatstone bridge circuit of the sensor, and amplifies the output signal of the sensor to standard signals (for instance, 0~5 Vdc or 4~20 mA) for further transmission to PLC in distance. The A2 SSC has a heavy-duty aluminum housing of anodized surface treatment. Thanks to both the rubber-seals between housing cover and container and the water-proof cable gland, model A2 SSC is protected to IP65, and can be easily fixed to panel mounting plate with two water-proof holes which are hidden inside the housing. Electrical Features: Suitable for any sensor of strain gauge Wheatstone bridge circuit of output sensitivity ranging from 1mV/V, …, 12mV/V Easy to build up electric connection with two water-proof cable glands Easy-connecting-terminals for electric connection Inverse-polarity protection for sensor circuit when power supply is connected reversely Excitation voltage adjustable with a built-in potentiometer, and capable for 8 unit parallel-connected sensors of 350Ω bridge resistance Gain and Zero adjustable with two built-in potentiometers Output configurable to 2-wire, 3-wire, or 4-wire for either current or voltage O/P signal Fully calibrated to standard output signal for rated sensor sensitivity before delivery Mechanical Features: Aluminium housing of anodized surface treatment Rubber-seals between housing cap and container Easy-fitting to panel by means of two water-proof holes Environment protection: IP65 Net weight: 350g BCM SENSOR TECHNOLOGIES BVBA Industriepark, Brechtsebaan 2 website: www.bcmsensor.com B-2900 Schoten - Antwerpen, BELGIUM email: sales@bcmsensor.com

Open the catalog to page 1

Model A2 Heavy Duty Signal Conditioner Specifications: 1. power supply: 12, ..., 24 Vdc 2. excitation voltage for sensors: 5, ..., 10 Vdc adjustable 3. input signal: 1mV/V, …, 12mV/V 4. output signal: 0~5 Vdc, 0~10 Vdc, or -5 ~ +5 Vdc 4~20 mA, 0~10 mA, or 0~20 mA 5. accuracy: ≤ ±0.1%fs (standard), ≤ ±0.2%fs 6. load resistance: ≥ 1kΩ (voltage output) ≤ 1kΩ (current output) 7. electric connections: - on the side for sensor connection, 5-pole connector (plus mating connector) - on the side for power supply and output signal, 7-pole connector for 2-wire, 3-wire or 4-wire configurations (plus...

Open the catalog to page 2

Model A2 2Pages

Catalog excerpts

All BCM SENSOR TECHNOLOGIES bv catalogs and technical brochures

Model A2
2Pages