Model 664F(b)
3Pages

Catalog excerpts

Flush-Diaphragm Pressure Sensors The 664F(b) pressure sensor which provides outstanding thermal stability and high accuracy is based on the BCM high-quality metal foil strain gauge. The sensor features all welded structure so there is no O-ring seal inside the sensor body. As this model employs flush-diaphragm structure, the 664F(b) is suitable for pressure measurement of viscous fluids or fluids with media containing solids. The sensor has its process connection and electronics housing connection with threads, and the entire sensor • rugged and fully welded structure • reliable metal foil strain gauge technology • compensated temperature range: -20 ~ +85 °C • excited by either current or voltage • industrial controls • hydraulic systems • food industry • process control systems Environmental Specifications • position effect: < 0.1% of zero offset shift • vibration effect: no change at 10 g (RMS), Electrical Interface excitation - (black) signal - (white) BCM SENSOR TECHNOLOGIES BVBA Industriepark Zone 4, Brechtsebaan 2 Tel.: +32-3-238 6469 website: www.bcmsensor.com B-2900 Schoten - Antwerpen, BELGIUM Fax: +32-3-238 4171 email: sales

Open the catalog to page 1

Model 664F(b) Flush-Diaphragm Pressure Sensors Technical Data Parameters pressure medium viscous fluid or media containing solids measuring ranges pressure references overload pressure output sensitivity zero offset ±0.5 (standard) long-term stability bridge resistance insulation resistance compensated temperature range operating temperature range storage temperature range temperature coefficient of zero offset temperature coefficient of span life time response time mechanical interface housing connection electrical interface 4 colored PVC flexible wires, 100mm pressure diaphragm material...

Open the catalog to page 2

Model 664F(b) Flush-Diaphragm Pressure Sensors Ordering Information ordering code: 664F(b)-250-II-G1/2-(*) 16 = 0~16 bar 25 = 0~25 bar 40 = 0~40 bar 60 = 0~60 bar 100 = 0~100 bar pressure ranges 160 = 0~160 bar G 250 = 0~250 bar G 400 = 0~400 bar G customized range G available as an option G accuracy II = 0.1%fs III = 0.25%fs IV = 0.5%fs (standard) process connection G1/2 other thread types available as options, consult BCM customized parameter “(*)” is necessary only if any customized parameter is required, otherwise it is neglectable. Examples of Ordering Code standard sensor:...

Open the catalog to page 3

Model 664F(b) 3Pages

Catalog excerpts

All BCM SENSOR TECHNOLOGIES bv catalogs and technical brochures

Model 664F(b)
3Pages