Catalogs >
BCM SENSOR TECHNOLOGIES bv >
159A Miniature Single Bending Beam Force Transducers

159A Miniature Single Bending Beam Force Transducers
3Pages

Catalog excerpts

159A Miniature Single Bending Beam Force Transducers - 1

Model 159A Miniature Force Transducers Description The 159A miniature force transducer is developed for force measurements which require a compact design. This model employs single-bending-beam working principle, so it needs to be installed as reverse beam in order to function properly. Based on BCM advanced strain gauge technology, the 159A provides excellent stability and reliability. This force transducer can be made from either beryllium copper or stainless steel to realize wide range from 1.2 N to 500N. - single bending beam working principle - reverse beam installation - compact design - stainless steel construction - range from 1.2N to 500N - accuracy up to 0.1%fs - force measurement - force control - medical instrumentation - home appliances Schematic Diagram of Reverse-Beam Mounting Arrangement H* *: H is different for different capacity. BCM SENSOR TECHNOLOGIES BVBA Industriepark Zone 4, Brechtsebaan 2 website: www.bcmsensor.com B-2900 Schoten - Antwerpen, BELGIUM email: sales@bcmsensor.com

Open the catalog to page 1

159A Miniature Single Bending Beam Force Transducers - 2

Model 159A Miniature Force Transducers Electrical Connection excitation+, (red) signal-, (white) excitation-, (yellow) signal+, (blue) Technical Data Parameters safe load limit ultimate overload zero unbalance ≤ ±0.2 (standard), ±1 in case of 1.2N capacity excitation (supply voltage) input resistance output resistance insulation resistance storage temp. range operating temp. range compensated temp. range temp. coefficient of sensitivity temp. coefficient of zero load cell body material mechanical interface refer to the dimensions on the datasheets electrical interface 4-color PVC isolated...

Open the catalog to page 2

159A Miniature Single Bending Beam Force Transducers - 3

Model 159A Miniature Force Transducers Ordering Information position (pos.) 1: model 159A pos. 2: capacities 1.2N 10N 20N 30N 50N 400N 70N 500N 100N 150N 200N 300N pos. 3: output sensitivity 1.5 mV/V pos. 4: non-linearity or accuracy class 0.1%fs, 0.2%fs (standard), 1%fs (for 1.2N capacity) pos. 5: bridge resistance 350Ω (Rin = 350±50Ω, Rout = 350±50Ω) pos. 6: mechanical interface Refer to the dimensions on the datasheets. Pos. 6 can be omitted from the ordering code. pos. 7: electrical interface 4F/PVC/0.15 = 4-color PVC isolated flying wires, length = 0.15m* pos. 8: environment protection...

Open the catalog to page 3