Catalogs >
BCM SENSOR TECHNOLOGIES bv >
131C Inner Cavity Pressure Transmitters For General Purpose

131C Inner Cavity Pressure Transmitters For General Purpose
5Pages

Catalog excerpts

131C Inner Cavity Pressure Transmitters For General Purpose - 1

Model 131C Pressure Transmitters for General Purpose Description The 131C is a general-purpose pressure transmitter made from the BCM ceramic pressure sensor. This model is developed for applications of processing and control operations involving aggressive media. To meet requirements of high corrosion resistance, the transmitter can have its process connection made from PVDF (polyvinglidene fluoride). With numerous options of process connection and electrical interface, the 131C can fit most industrial pressure measurement applications. The 131C consists of a ceramic diaphragm, stainless steel or PVDF wetted part, and stainless steel housing. The transmitter features an inner-cavity process connection to measure pressure of gases or dilute fluids with gauge pressure reference. By selecting proper electrical interface, the 131C is able to reach the environmental protection rating up to IP67. Features high chemical resistance chemical industry medical instrument selectable output: 4~20 mA (standard), 0.5~4.5V ratiometric and others. liquid level measurement process control wide choice of process connection and electrical interface protection rating up to IP67 BCM SENSOR TECHNOLOGIES BVBA Industriepark Zone 4, Brechtsebaan 2 website: www.bcmsensor.com B-2900 Schoten - Antwerpen, BELGIUM email: sales@bcmsensor.com

Open the catalog to page 1

131C Inner Cavity Pressure Transmitters For General Purpose - 2

Model 131C Pressure Transmitters for General Purpose Technical Data Parameters pressure medium gases or dilute fluids pressure references & ranges proof pressure burst pressure output signal long-term stability ≤ ±0.2 (standard), ≤ ±0.1 is available on requst load resistance for voltage output load resistance for current loop insulation resistance compensated temperature range operating temperature range storage temperature range temperature coefficient of zero temperature coefficient of span life time response time O-ring (fluorine rubber) pressure diaphragm wetted parts material 316L SS...

Open the catalog to page 2

131C Inner Cavity Pressure Transmitters For General Purpose - 3

Pressure Transmitters for General Purpose electrical interface circular connector - 2 wires for current loop - 3 wires for voltage output - cable length (L) should be specified electronics housing (casing) BCM SENSOR TECHNOLOGIES BVBA Industriepark Zone 4, Brechtsebaan 2 Tel.: +32-3-238 6469 website: www.bcmsensor.com B-2900 Schoten - Antwerpen, BELGIUM Fax: +32-3-238 4171 email: sales@bcmsensor.com

Open the catalog to page 3

131C Inner Cavity Pressure Transmitters For General Purpose - 4

Pressure Transmitters for General Purpose mechanical interface - The mechanical interfaces and the electrical interfaces listed can be combined freely. - If other types of interfaces are on request, consult BCM. BCM SENSOR TECHNOLOGIES BVBA Industriepark Zone 4, Brechtsebaan 2 Tel.: +32-3-238 6469 website: www.bcmsensor.com B-2900 Schoten - Antwerpen, BELGIUM Fax: +32-3-238 4171 email: sales@bcmsensor.com

Open the catalog to page 4

131C Inner Cavity Pressure Transmitters For General Purpose - 5

Model 131C Pressure Transmitters for General Purpose Ordering Information position (pos.) 1: model 131C pos. 2: pressure ranges and references G: gauge pressure 16bar G 2bar G 160bar G 25bar G 2.5bar G 250bar G 40bar G 4bar G 400bar G 60bar G 6bar G 100bar G 10bar G pos. 3: output signal 4/20mA (standard) 0.5/4.5V (ratiometric) 0/5V 1/5V pos. 4: accuracy 0.5%fs (standard), 1%fs pos. 5: pressure diaphragm Mono: mono-block 17-4PH PVDF: polyvinylidene fluoride 316LSS pos. 6: mechanical interface Refer to the drawings of mechanical interface for available options. pos. 7: electrical interface...

Open the catalog to page 5