Text version of the page

LSK x2x Conductive Level Sensor

Wetted parts in acid-proof, stainless steel and PEEKCompact, food compatible, hygienic design 3A approved, FDA and EHEDG compliant Process temperature -20...140°C Optimised fl ow geometryMillimetre precise switch point Installation in pipes from DN25 and upwards Optional PTFE coating Optional switching electronics (LKP100) LSK320LSK420LKP100

Description

The conductive level sensor LSK is used for level detection and dry run protection in conductive liquids. The LSK measures the resistance between the ground potential and the sensing element covered by the conductive liquid. The tank or pipe side acts as the ground potential. If the tank is made of a non-conducting material a ground electrode must be installed. The LSK provides a resistance output by itself. A level control module e.g. LKP 100 or DNGA 230100 must be installed to provide a relay output. The hygienic installation is ensured by using a hygienic process weld-in sleeve e.g. PM 020. The rod electrode can be shortened to any required length simply by cutting the length.The LSK is well suitable for CIP and SIP processes. Design and specifi cations subject to change without noticeData Sheet LSK-1www.baumerprocess.com Page 1