THE B-CONTROL

B-CONTROL fully automati-cally monitors and controls all SECCANT'S internal func- tions like- Operating hours - Operating reports - SECURUS (optional) - Pressure dew point(optional)At the same time SECCANT'SB-CONTROL communicates with the compressor's respec- tive unit control:At start and stop the com-pressor unit sends SECCANT an On/Off signal. SECCANT permanently monitors itself during operation and sends the compressor a release signal.If a release signal is notreceived, due to necessary maintenance for example, the compressor is automa- tically stopped.If the compressor unit isequipped with a B-CONTROL extended control and connected to SECCANT via a CAN-Bus, online control and online monitoring of SECCANT and the compressor unit can be realised via an external control room. As an SPC control B-CONTROL ensures the unit can be pro- grammed according to custo- mer requirements.

YOUR SECCANT'S COMMUNICATION CENTRE

B-MESSENGERinforms online the unit operator via SMS onhis/her mobile phone or pager or via fax about all important compressor data.About pending maintenancework, for example or with models 3A and 4A about a pending filter change. 2
SECCANT 3 / 3A / 4 / 4A