Altra Industrial Motion Shaft Mounted Geared Motor Series BF Three phase shaft mounted geared motors for driving machines and equipment of all types. Standards • CE-Mark • UL • CCC • CSA • ATEX • GOST • ISO9001 • ISO14001 • OHSAS18001 • Motors according to EN 60034 • Torque 90 Nm ... 18,500 Nm • Ratios two-stage: 5.22 - 141.80 three-stage: 11.42 - 592.8 • Versatile installation possibilities • Completely enclosed, sealed against dust and water spray • Lubrication change first after 15,000 hrs • Low noise gearing Bauer Gear Motor supplies modern drive solutions for all industry sectors in which material must be moved. The customer benefit lies in the robustness and durability of our products. The simple and cost effective installation, the minor service necessity and the high efficiency reduce the costs throughout the whole life of the drive. The Bauer-Service is at your disposal world-wide. Motors • Power • Mains • Enclosure • Connection 0.03 kW ... 75 kW 110 V ... 690 V, 50/60 Hz IP 65 (Standard), IP 66 (Optional) Standard with CAGE CLAMP® Options • Connecting with plug connectors • With integrated inverter up to 7.5 kW Brakes • Enclosure IP 65 (Standard) • Performance and application optimised brake range • Maintainance friendly design Bauer geared motors make drive solutions possible in the power range 0.03 to 75 kW. Proximity to the customer, both geographically and psychologically, is an important pre-condition for good cooperation. Our highly qualified advisors, technicians and fitters are working for you round the world. They speak your language – even in the transmitted sense. • Corrosion prote

• CAGE CLAMP® connection technology as standard. • Optional with conventional terminal board • The stator winding is manufactured from high quality enamelled copper wire with state-of-the-art three layer insulation in the groove and winding head. • The stator winding is impregnated with a damp-proof and drip-free resin. • The electrical design of the motor is adapted to the gearbox. • Aluminium die cast cage rotor ensures a high reliability at high starting torques and low starting currents. • Pull-up torques are mostly avoided • State-of-the-art gearbox housing designed for operation under harsh...