| | | |
| | | |
| | | |
| | | |
| | Trie thread of stone ISO 9001 A Division of MASUREEL Holding nv. Technical Data Sheet BCS D-L-DRY Basalt continuous filaments roving is chopped to lengths for the production of mats and the reinforcement of composites. BCS : Basalt Chopped Strand The first code D indicates the monofilament diameter: 10-20 urn The second code L indicates the chop length : 1/8", VV", !4", 1", 2", 3" The third code DRY indicates the sizing. The good mechanical properties of BCF (strength & rigidity), the easy wetting of the filament surface and their recyclability make them particularly suitable for said composites application. Six chopped lengths are proposed. A standard sizing, AminoSilane, ensures good adhesion to phenolic and epoxy resins. Other sizings can be proposed as options under customer order. | |
| | | |
| | | | | | | | | | | | | | Sizing/binder suitability table | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | 1: best - 2: OK - 3: not OK | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Density of unsized filament matl* | | | | | | | | Moisture content of basaltic rock* | | | | | | | | | | | | | | | | | | | | | | | | Filament diameter range** | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Continuous max temperature | | | 350°C with stress 550°C w/o stress 1200°C fire blocking | | | | | Moisture content (sized roving) ** | | | | | | | | Ignition loss, also sizing content ** | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | * data from literature ** properties are given on the "Quality Report" coming with each product delivery *** according to the order, see the Quality Report **** after drying according ISO 3344:1997 | |
| | | |
| | Packaging The chopped basalt filaments are put in a PP bag inside an hexagonal cardboard box, with identification label. The box is securely strapped to a pallet. Total weight is about 500 kg. Product Stability: BASALTEX™ Products have not been designed for full external exposure conditions and cannot be guaranteed for use in such situations. However, these BASALTEX™ products have considerable tolerance to damp conditions and occasional water immersion. After drying out, the product will give the same level of performance as the original sample. Stability over time: Said products not being subjected to excessive heat, wear and abrasion, all evidence obtained to date indicates that their performance should not significantly change over a significant period of time. It is the responsibility of the developer of the end-product, finished device or system to test its performance in the end-application. | |
| | | |
| | Rev 11.08 BASALTEX Division, MASUREEL Holding nv • Zuidstraat, 18 • B-8560 Wevelgem • BELGIUM PHONE +32.(0)56.420.662 • FAX +32.(0)56.424.234 - pkoslowski@flocart.com | |
| | | |
| | | |