BAS BI 450 - Basaltex - Flocart - #1

/ 1


catalogue search
BAS BI 450 - Basaltex - Flocart
P. 01
Page:
BAS BI 450 - Basaltex - Flocart


See other catalogues for Basaltex - Flocart
You may also be interested in

Fiber, Fabric, Nonwoven


Text version of the page
BASALT E K"
The thread of stone
ISO 9001 A Division of MASUREEL Holding nv.
Technical Data Sheet Fabric Type BAS Bl 450
Multiaxial fabric for composite applications, is entirely made of 100% BCF (basalt continuous filament) roving.
The silane sizing is selected, which has components to ensure elasticity of the yarn during textile processes. The sizing allows good compatibility with epoxy, vinyl ester and polyester resin systems.
Property
Standard/Method
Unit
Base material
Density of unsized filament matl*
kg/dm3
2.70
+ 5%
Moisture content of basaltic rock*
%
0.1
+ 0.05
Melting point*
°c
1350
+ 100
Fabric
Specific surface weight**
ISO 3374:2000
g/m2
464
+ 8%
Weave type**
biaxial
Weight per layer (Yarn type)**:
- +45°
g/m2
228
- -45°
g/m2
228
- stitching
g/m2
8
Width**
ISO 5025:1997
mm
1270
+ 3%
Thickness
ISO 4603:1993
mm
0.45
Sizing type**
silane
Moisture content (fabric)
ISO 3344:1997
%
<0.3
LOl, also sizing content**
ISO 1887:1995***
%
0.4-0.6
Combustibility
NF P92-503:1995
M0
Pass
UV stability
ISO 105-B02
6
Colour fastness
ISO 1005-BX12
6
* data from literature
**properties given on the "Quality Report" coming with each product delivery *** after drying according ISO 3344:1997
Packaging
Fabric length is approximately 50 lm per roll. Other length on request. Identification label. Standard packing.
Product Stability:
BASALTEX™ Products have not been designed for full external exposure conditions and cannot be guaranteed for use in such situations. However, these BASALTEX™ products have considerable tolerance to damp conditions and occasional water immersion. After drying out, the product will give the same level of performance as the original sample.
Stability over time:
Said products not being subjected to excessive heat, wear and abrasion, all evidence obtained to date indicates that their performance should not significantly change over a significant period of time. It is the responsibility of the developer of the end-product, finished device or system to test its performance in the end-application.
Rev 03.09 BASALTEX Division, MASUREEL Holding nv • Zuidstraat, 18 • B-8560 Wevelgem • BELGIUM PHONE +32.(0)56.420.662 • FAX +32.(0)56.424.234 - pkoslowski@flocart.com

pageCatalog pdf di En 2012-05-22-28