BAS ARAMID 850.1270.T - Basaltex - Flocart - #1

/ 1


catalogue search
BAS ARAMID 850.1270.T - Basaltex - Flocart
P. 01
Page:
BAS ARAMID 850.1270.T - Basaltex - Flocart


See other catalogues for Basaltex - Flocart
You may also be interested in

Nonwoven, Fiber, Fabric


Text version of the page
BASA LT EX"
The ti) re Q ü of stone'
ISO 9001 A Division of MASUREEL Holding nv.
Technical Data Sheet
Fabric Type HYBRID Bas/Aramid 850.1270.T
Woven fabric for composite applications, is made of BCF (basalt continuous filament) roving and Twaron aramid roving.The first code 850 is the surface density in g/m2. The second code 1270 is the width of the fabric in mm. The third code indicates the weave.
Property
Standard/Method
Unit
Value
Tolerance
basalt roving 600 tex -tensile strength -E-modulus
ASTM 2256-97
cN/tex GPa
>67 84
±5% ±3
Twaron aramid roving 8550 dtex
-tensile strength -E-modulus
cN/tex GPa
204 99
±5% ±3
Specific surface weight*
ISO 3374:2000
g/m2
850
Weave type*
Twill 1/3
Yarn density/type*:
- warp
- weft
ends/cm ends/cm
6.9 (600 tex basalt roving)
5.0 (855 tex aramid roving)
Width*
ISO 5025:1997
mm
1270
-0/+20 mm
Thickness
ISO 4603:1993
mm
1.13
Breaking load:
- warp
- weft
ISO 4606:1995-Type II
N/25mm N/25mm
>6935 >21800
Moisture content (fabric)
ISO 3344:1997
%
<0.3
*properties given on the "Quality Report" coming with each product delivery
Packaging
Fabric length is approximately 500 Im per roll. Other length on request. Roll tube has internal diameter of 150 mm. Identification label. Standard packing.
Product Stability:
BASALTEX™ Products have not been designed for full external exposure conditions and cannot be guaranteed for use in such situations. However, these BASALTEX™ products have considerable tolerance to damp conditions and occasional water immersion. After drying out, the product will give the same level of performance as the original sample.
Stability over time:
Said products not being subjected to excessive heat, wear and abrasion, all evidence obtained to date indicates that their performance should not significantly change over a significant period of time. It is the responsibility of the developer of the end-product, finished device or system to test its performance in the end-application.
Rev 3.08 BASALTEX Division, MASUREEL Holding nv • Zuidstraat, 18 • B-8560 Wevelgem • BELGIUM PHONE +32.(0)56.420.662 • FAX +32.(0)56.424.234 - pkoslowski@flocart.com

pageCatalog pdf di En 2012-05-22-28