Catalogs >
Barksdale >
UNS2000

UNS2000
4Pages

Catalog excerpts

The multi Level Switch Series UNS2000 can be supplied with up to 6 switchpoints (see max. switchpoints) and with a length of max 3000 mm. Besides the float operated reed contacts to detect liquid levels, the UNS 2000 can be supplied also with a temperature sensor and/ or temperature contact(s), which are to handle as switchpoint(s) -please note max. switchpoints! A wide selection of mounting elements, electrical connections, various materials and options allow you to "design" your own switch, within the given dimension limits, for your particular application. Very long units or large flanges can cause high shipping and installation costs and "split" versions might be the answer. Consult us for the best combination. The min. dimensions are based upon the medium water. Depending on the density of other fluids this dimension can vary several millimetres. The contact modes (NO or NC) are defined on the basis of an empty tank and for installation through the top or through the bottom (when specified as "-U"). When not specified otherwise we will set the switch position for density 1 (water) and the switch action to be on moving upward. Temperature sensor (PT100) and/ or the temperature switch, a Bi-metall hermetically sealed element, are installed only in the bottom of the stem. That means: Dimensions B + 10 mm with temperature sensor PT100) = BPT Dimensions B + 40 mm temperature switch (TP) = BTP Technical Data Contact Wiring Subject to technical changes.

Open the catalog to page 1

Level SwitchesDimensions (mm / inch) [0.512] Dual switching For NPT thread tank fittings all lengths from bottom edge. Immersion depth at densityc 1: # Float position ■^compound points at bottom Ocom pound points at top ■=5com pound points at bottom 2l Subject to technical changes. Barksdale®

Open the catalog to page 2

Brass Version Order Code Type: UNS2000 Material of Stem and Mounting Element: MS = Brass, CW614N / CW508L (former Ms58 / Ms63) Mounting Element (other on request) 3/8 - G3/8" mounting thread for inside mounting: only with PG T1 - G1" Tank screw (only with BN30 float) T2 - G2" Tank screw (not with VA80 float) T2NPT - 2"NPT-Tank screw (not with VA80 float) Electrical Connection (see table max. Switchpoints) ST1 - Cube Plug DIN EN 175301-803-A (former DIN 43650), 3-pin + ground, IP65 with mating plug ST2 - Angle Plug DIN 43651,6-pin + ground, IP54 with mating plug M12x1 - M12x1 mm...

Open the catalog to page 3

Level Switches VA Version Order Code Type: UNS2000 Material of Stem and Mounting Element: VA = stainless steel 1.4571 (316 Ti) Mounting Element (other on request) 3/8 - G3/8" mounting thread for inside mounting: only with PG T1 - G1" Tank screw (only with BN30 float) T2 - G2" Tank screw (not with VA80 float) - Flange DIN 2527, DN 100/PN16 - Flange ASME B16.5, 2" 150lbs, RF (not with VA80) - Flange ASME B16.5, 3" 150lbs, RF (not with VA80) - Flange ASME B16.5, 4" 150lbs, RF - 2"NPT-Tank screw (not with VA80 float) Electrical Connection (see table max. Switchpoints) ST1 - Cube Plug...

Open the catalog to page 4

UNS2000 4Pages

Catalog excerpts

All Barksdale catalogs and technical brochures

UNS2000
4Pages