Catalogs >
Barksdale >
UNS1000

UNS1000
4Pages

Catalog excerpts

Function The multi Level Switch Series UNS1000 can be supplied with up to 5 switchpoints (see "Max. Switchpoints"). Besides the float operated reed contacts to detect liquid levels, the UNS1000 can be supplied also with a PT100 temperature sensor or with a temperature switch TS. A wide selection of mounting elements, electrical connections, various materials and options allow you to "design" your own switch, within the given dimension limits, for your particular application. (see "Order code") The min. dimensions are based upon the medium water. Depending on the density of other fluids this dimension can vary several millimeters. The contact modes (NO or NC) are defined on the basis of an empty tank and for installation through the top or through the bottom (when specified as "-U"). When not specified otherwise we will set the switch position for density 1 (water) and the switch action to be on moving upward. Max. temperature range: -10°C...+105°C (Standard), Option: -40°C...+150°C, Silicone cable (-HT) The mounting position should be vertical, ±30°, though top or bottom. Technical Data Contact Wiring Barksdale® Subject to technical changes.

Open the catalog to page 1

Level SwitchesDimensions (mm / inch) LO = max. 1000 mm Dual switch (standard) 1 float for 2 switchpoints For NPI tank screw connections dimensions from bottom of thread Immersion depth at density 1: VA27 = 21 ±2 mm (30 mm high) BN25 = 13 ±2 mm (30 mm high) VA44 = 22 ±2 mm (42 mm high) BN18 = 15 ±2 mm (25 mm high) see float marking NO-function compound points at bottom compound points at top > magnet ring at bottom Bpt = first switch point with option PT100 (mounting on bottom) Bts = first switch point with option TSxx/2 (mounting on bottom) Subject to technical changes.

Open the catalog to page 2

Brass Version Type: UNS1000 Material of Stem and Mounting Element: MS - Brass, CW614N / CW508L (former Ms58 / Ms63) Mounting Element (other on request) 1/8 - G1/8" mounting thread for inside mounting: only with cable (K) 3/8 - G3/8" mounting thread for inside mounting: only with (PG) or (K) T1/2 - G1/2" tank scew, only with BN18 float T1 - G1" Tank screw (not with VA44 float) M20x1,5 - Tank scew M20x1,5 mm (only BN18) T1NPT - 1"NPT-Tank screw (not with VA44 float) Electrical Connection (see table max. Switchpoints) - Cube Plug DIN EN 175301-803-A...

Open the catalog to page 3

Level Switches UNS 1000 Order Code Type: UNS1000 Material of Stem and Mounting Element: VA = stainless steel 1.4571 Mounting Element (other on request) 1/8 - G1/8" mounting thread for inside mounting: only with cable (K) 3/8 - G3/8" mounting thread for inside mounting: only with (PG) or (K) T1/2 - G%" Tank screw, only with BN18 float T1 - G1" Tank screw (not with VA44 float) FL2 - Flange DIN 2527, DN 32/PN16, (not with VA44 float) FLA3 - Flange ASME 16.5, 2" 150lbs, RF T1NPT - 1"NPT-Tank screw (not with VA44 float) Electrical Connection (see table max....

Open the catalog to page 4

UNS1000 4Pages

Catalog excerpts

All Barksdale catalogs and technical brochures

UNS1000
4Pages