Mechanical Temperature Switches - Barksdale - #6

Text version of the page

Specifications are subject to changes without notice. 11 / 05 KTM-US 923-0876 01/1 Technical Data Mechanical Temperature Switches P3 Features - Dual switch with remote sensor and weatherproof housing - integrated terminal strip and covered set point adjustment - Protection class IP65 - For use as two-position controller - Optional for 1st contact: - Manual reset G-microswitch - Adjustable hysteresis (reset difference) S-microswitch - The second contact can also be used for max.- or min.- monitoring or for sensor monitoring Measuring Ranges -45 °C...+66 °C to +160 °C...+316 °C Applications Temperature monitoring in industry, shipbuilding, railcars with capillary T2H Housing material : Die-cast aluminum Temperature sensor material : Stainless steel (316SS) Temperature sensor : Capillary length 1,8 m or 3,6 m (optional 7,5 m), armoured Sensor without thermowell is applicable up to 21 bar only Electrical characteristics : All models are SPDT Microswitch : H, M, GH, GM (optional with RD manual reset for the 1st low circuit switching contact only) Contact rating : - AC: 125 V AC to 250 V AC, 10 A 480 V AC, 3 A - DC: 6 V DC to 24 V DC, 0,5 A Electrical connection : 3/4“ NPT female, internal screw terminal, cable gland in PA, range 6...12 mm is provided Protection class : IP65, intrinsically safe acc. EEx ia II C for gases and dust Set point adjustment : Turn adjustment knob clockwise to increase actuation point Standards : The instruments fullfill the requirements of following harmonized european standards: EN 60014 1977 + A1 to A4 and EN 500120 1977 + A1 Electrical characteristics : Umax = 28 V DC or 20 Veff, Imax = 50 mA DC or 35 mAeff Exi-model To comply with the intrinsically safe approval, IS curcuits with the following maximum ratings have to be used: Umax = 28 V and Imax = 50 mA Approvals : Various approvals on request Weight : appr. 1,5 Kg