| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | | | |
| | | |
| | | Accessories | | |
| | | |
| | | Thermowell pressure- and temperature velocity limitations Maximum fluid velocity in m/sek. | | |
| | | Note: Thermowells for 'local mount' models are treated on the respective pages. --114 | | |
| | | |
| | | | | | | | | | | | | | | | Material | Insertion length in mm | | | | | 63,5 | 114 | 190 | 267 343 | 419 | 495 | 572 | | | | Brass | 98 (45) | 39 (25) | 14 | 7 4,5 | 3 | 2 | 1,5 | | | | Steel | 125 (82) | 76 (45) | 27 | 14 8,5 | 5,5 | 4 | 3 | | | | Stainl. steel | 147 (106) | 83 (63) | 30 | 15 9 | 6 | 4,5 | 3 | | | | | | | | | | | | | | | |
| | | |
| | | Special lengths on request | | |
| | | |
| | | 892 | | |
| | | |
| | | 9,5 | | R | | |
| | | |
| | | |
| | | SW32| 1/2" NPT | | |
| | | * Other models available, also R-thread | | |
| | | |
| | | |
| | | The values in brackets represent industrial safe values for water flow. Other values are for steam, air, gas or similar low density media. | | |
| | | | | | | | | | | | | Order number | P* | R | T | V | | | | Brass | | | | | | | | 906-0044 | 1/2" NPT | 17,5 | 47,5 | 16 | | | | 906-0042 | 3/4" NPT | 22,2 | 47,5 | 19 | | | | Stainless steel | | | | | | | | 906-0043 | 1/2" NPT | 17,5 | 47,5 | 16 | | | | 906-0041 | 3/4" NPT | 22,2 | 47,5 | 19 | | | | | | | | | | | | |
| | | |
| | | Pressure - temperature rating (in bar) | | |
| | | |
| | | | | | | | | | | | | | Material thermowell | Temperature in °C | | | | +22 | +94 | +210 | +320 | +430 | | | | Brass | 350 | 295 | 70 | * | * | | | | Steel | 365 | 350 | 335 | 320 | 245 | | | | Stainl. steel | 490 | 435 | 390 | 380 | 365 | | | | | | | | | | | | | |
| | | |
| | | Split nut Used to hold sensor in standard thermowell. 1/2" NPT | | |
| | | |
| | | * Stainless steel recommended | | |
| | | |
| | | |
| | | Order number 906-0045 | | |
| | | i ¡III illl.-i ■■■ I LT J pig | | |
| | | (Standard lengths) | | |
| | | |
| | | |
| | | | | | | | | | Description | Order number suffix | | | | Stainless steel capillary | S - A (add to order number) | | | | stainless steel armoured | | | | | | | | | |
| | | |
| | | 30 | | |
| | | |
| | | |
| | | Union connector Union contains compression discs and will seal up to 21 bar | | |
| | | Example without (o) manual reset: o: T2H-H152-S-A, T2H-H601S-12-A Example with (m) manual reset: m: MT1H-G152-S-A-RD etc. Capillaries in special lengths | | |
| | | A | | |
| | | |
| | | P | | |
| | | |
| | | |
| | | |
| | | Stainless steel sensor and | | S-25-A (add to any standard | | |
| | | |
| | | |
| | | | | | | | | | | | | | Order number | Material | p. NPT | A | 7,50 m stainless steel capillary and stainless steel armour: | order number for capillary lengths of 180 cm | | | | 926-0046 906-0033 926-0047 906-0032 | Brass Brass Stainless steel Stainless steel | 1/2" 3/4" 1/2" 3/4" | 57 63,5 57 63,5 | | | | | | Example without (o) and with (m) manual reset: o: MT1H-H153 S-25-A, T2H-H251 S-25-A m: MT1H-G153 S-25-A-RD, T2H-H251 S-25-A-RD | | | | | | | | | | | | | |
| | | |
| | | Certifícate | | |
| | | |
| | | | | | | | | | Order number | Description | | | | 998-9991 | Work certificate EN 10204-2.1 | | | | 998-9991 | Work certificate EN 10204-2.2 | | | | | | | | | |
| | | | | | | | | | Order number | Description | | | | 0699-002 | Tube 50 g | | | | | | | | | |
| | | |
| | | |
| | | 16 | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |