| | | Accurately reads and grades 2D and 1D bar codes. A traceability program is on!/ as successful as the vision sensor that reads 2D or ID bar tcdes under pan: cond't o-:y,. Tn.it s why m-ijo- iv.r n » i \ .tiepe- n th industry's most reliable sensor expert former vision needs. Banner's PresencePLUS* Pro and P4 OMNI with optional bar code reading software offer tremendous power and flexibility, for accurate highspeed bsr code reading in the toughest environments. The PresencePLUS* PA BCR and high-resolution BCR 1.3 vision sensors have been developed from the ground up for the most robust 2D and ID linear barcode reading capabilities—even when conditions and codes are less than ideal. Whether for produaion;i>:!:ejb:li'.vot direct-mjfed manjfdcured components or ■ . '.■ i ■■ ■ ■' !■ ■ ■ i' i. ■ ■•■''[}.'. so iv (i(ei:.rgin.:-ered to offer the highest read rates in low contrast/poor visibility condtttoris, or where marked or formed bar codes have degraded. The BCR is "taught" the correct codes, either with the sensor itself or over an industrial Ethernet network (EIP or Modbus TCP/IP). Banner's dedicated BCR solution; keep lines moving by reading despite problems such as low contrast, shadows, orientation, si/f.-sce variat'ons or ma'-Jrig va.'ables resulting from degraded etching, stamping or printing. BCR models read 2D Data Matrix ECC200 and ID linear bar codes such as Code 39, Code 128, Codabar, Interleaved 2 of 5, EAN-8and EAN-13 (supports UPC-A), UPC-Eand Postnet. High-resolution BCR 1.3 models (1280x 1024 pixels) feature 1.3 megapixel imaging that reads and grades smaller barcodes, or allows larger fields of view. Codes and code grades can be communicated using the BCR's serial port. | | |
| | | The high-résolut Ion ftcMAaWJSM BcR 1.3 delivers tin extended Held of view to read ID linea' and 2D bar codes simultaneously to verify components in an assembly are correctly paired. Strobed ring lighting and 1.3 megapixel resolution provide increased image repeat rares loi accurate reading at full tine speed. Large Area Verification for Sorting and Die Protection The dies in lire presses suffer <.oirlvd.im.Kjr it ilie press tries to stamp tread into an unstamped, or green, tire of the wrong size. To direct each tire to the correct press at production device speeds, a series of si* high-résolulion PresencePLUS PA BCR 13 vision sensors sort green tires based on bar code data printed on a label on rhe tire's bead, regardless of position of orientation. | | |