T30U Series

U-GAGE

®

Sensors

T30U Specifications (cont’d) T30U Specifications

Sensing Performance Analog sensing resolution or discrete output repeatability: ±0.25% of measured distance [“A” suffix (.5 mm min); “B” suffix (1 mm min)]
(Specified using a 10 x 10 cm aluminum target at 25Ëš C under fixed sensing conditions.) Analog linearity: ±0.5% of full-scale span Min. window size: 10 mm Hysteresis of discrete output: 2.5 mm Temperature effect: 0.2% of sensing distance per ° C AdjustmentsSensing window limits (analog or discrete): TEACH-mode programming of near and far window limits may be set using membrane push buttons on sensor or remotely using TEACH input. Window limits may be programmed separately, or together. Analog output slope: the first limit taught is assigned to the minimum output value (4 mA or 0V). IndicatorsFour status LEDs: In RUN mode: Green ON Steady: Power ON, RUN mode Green Flashing: Discrete output is overloaded Red Flashing: Relative received signal strength Yellow analog ON Steady: Target is inside window limits Yellow discrete ON Steady: PROGRAM mode Output conducting In Program mode: Green OFF: Red Flashing: Relative received signal strength Yellow ON Steady: Ready for first window limit Yellow Flashing: Ready for second limit Yellow OFF: Not teaching this output Construction Molded reinforced thermoplastic polyester housing. Environmental Rating Leakproof design is rated IEC IP67; NEMA 6P Connections 2 m or 9 m 5-conductor PVC-covered attached cable, or 5-pin Euro-style quick-disconnect fitting. QD cables are ordered separately. See page 382.
MEASUREMENT & INSPECTION Operating ConditionsTemperature: -20° to +70° C Relative humidity: 100% Vibration and Mechanical ShockAll models meet Mil. Std. 202F requirements. Method 201A (Vibration: 10 to 60Hz max., double amplitude 0.06", maximum acceleration 10G). Also meets IEC 947-5-2 requirements: 30G, 11 milliseconds duration, half sine wave. Application Notes Objects passing inside the specified near limit will produce a false response.NOTE: For more information about out-of-range and signal loss response of the analog output, see product literature. Certifications Hookup DiagramsAnalog/Discrete Models: NPN: MI16 (p. 495) PNP: MI17 (p. 496) Dual-Discrete Models : NPN: MI14 (p. 495) PNP: MI15 (p. 495)

More information online at

bannerengineering.com 299