T30U Series

U-GAGE

®

Sensors

T30U, 15-24V dc

DownloadPDF

ModelsRangeFrequencyCable**DiscreteOutput(s)Analog OutputResponse Ti m eData Sheet

T3 UUNA T3 UUNAQ 5-pin Euro QD

NPN

150 mm - 1 m228 kHz2 m 0 to 10V dc48 ms T3 UUPA 2 m T3 UUPAQ 5-pin Euro QD

PNP

57438 T3 UUNB T3 UUNBQ 5-pin Euro QD

NPN

300 mm - 2 m

†

0 to 10V dc 96 ms 128 kHz2 m T3 UUPB 2 m T3 UUPBQ 5-pin Euro QD

PNP

* For sensors with Teflon ® -protected face and transducer (long-range models only), add suffix -CRFV to the model number (example, T3 UUNB-CRFV ). ** For 9 m cable, add suffix W/3 to the 2 m model number (example, T3 UUNA W/3 ). A model with a QD requires a mating cable (see page 382). † Teflon ® -encapsulated models have a range of 300 - 1.5 m.

T30U Specifications

Sensing Range“A” suffix m odels: 150 mm min. near limit; 1 m max. far limit “B” suffix m odels: 300 mm min. near limit; 2 m max. far limit “-CRFV” m odels: 300 mm min. near limit; 1.5 m max. far limit Effective Bea m See charts EBPC-8, EBPC-9, EBPC-10, EBPC-11 and EBPC-12 on page 472. Supply VoltageCurrent sourcing analog output m odels: 12 to 24V dc (10% max. ripple); 90 mA (exclusive of load) Voltage sourcing analog output m odels: 15 to 24V dc (10% max. ripple); 90 mA (exclusive of load) Dual-discrete output m odels: 12 to 24V dc (10% max. ripple); 90 mA (exclusive of load)
MEASUREMENT & INSPECTION Ultrasonic FrequencyShort Range: 228 kHz, Long Range: 128 kHz. Supply Protection Circuitry Protected against reverse polarity and transient voltages. Output Protection Protected against continuous overload and short-circuit; transient over-voltage; no false pulse on power-up. Output RatingsDiscrete (switched) output: 100 mA max. per sensor Off-state leakage current: less than 10 mA On-state saturation voltage: Voltage sourcing: 0 to 10V dc (at 1K ohm min. resistance) less than 1V at 10 mA and less than 1.5V at 100 mA Analog Output: Current sourcing: 4 to 20 mA, 1 ohm to Rmax. Rmax = Vsupply - 7V 20 mA Output ConfigurationDiscrete (switched) output: SPST solid-state switch conducts when target is sensed within sensing window; choose NPN (current sinking) or PNP (current sourcing) models. Analog output: Choose 0 to 10V dc sourcing or 4 to 20 mA sourcing output models; output slope may be selected using TEACH sequence. Output Response Ti m eDiscrete output: “A” suffix models: 48 milliseconds “B” suffix models: 96 milliseconds Analog output: “A” suffix models: 48 milliseconds average, 16-millisecond update “B” suffix models: 96 milliseconds average, 32-millisecond update Dual-discrete: “A” suffix models: 48 milliseconds “B” suffix models: 96 milliseconds
Teflon ® is a registered trademark of Dupont ™

298

More information online at

bannerengineering.com