Temperature Sensors - BANNER

Catalogue Temperature Sensors

www.bannerengineering.com

Page

/ 21

See other catalogues for BANNER

Text version of the page

K50 Series

EZ-LIGHT™ Pick-to-Light Sensors

Specialty E-Series K50, 12-30V dc

• Job light is Green at all times while job input is active.

• Presence of hand activates output.

• Presence of hand while job input is inactive causes unit to light Red giving operator visual verification that sensor is functioning properly.

• Aids in alignment of retroreflective models by providing Red signal when retroreflective target is not aligned or present.

Sensing Mode/LED*

Output Type

Job Light

Data Sheet

Cable**

Output

Models

Range

K50APLPGREQ

P) i

PNP

K50RPLPGREQ

2 m

4-pin Euro QD

125680

K50ANLPGREQ

NPN

POLAR RETRO

K50RNLPGREQ

K50APFF50GREQ

PNP

K50RPFF50GREQ

50 mm Cutoff

Green (Red)

K50ANFF50GREQ

NPN

FIXED-FIELD

K50RNFF50GREQ

4-pin Euro QD

125680

K50APFF100GREQ

PNP

K50RPFF100GREQ

100 mm

Cutoff

K50ANFF100GREQ

NPN

FIXED-FIELD

K50RNFF100GREQ

Visible Red LED INFRARED LED NO = Normally Open, NC = Normally Closed

Cable d models: For 2 m cable , remove q from model number (example, k50aplpgre) or 9 m cable, add suffix w/30 to the 2 m model number (example, k50aplpgre w/30). QD models: For 150 mm 4-Pin Euro-style PVC pigtail, add suffix p to integral QD model number (example, k50aplpgreqp).

LUO

LLIU OfLLI

LU —


	K50 Specifications
	Supply Voltage and Current	12 to 30V dc, < 60 mA max. current @ 12V dc (exclusive of load); < 40 mA max. current @ 30V dc (exclusive of load). AS-i Compatible.
	Supply Protection Circuitry	Protected against reverse polarity and transient voltages
	Output Configuration	PNP or NPN (depending on model)
	Output Rating	150 mA max., OFF-state leakage current: < 1 @ 30V dc; ON-state voltage: < 1V @ 10 mA dc; < 1.5V @ 150 mA dc
	Output Protection Circuitry	Protected against false pulse on power-up and continuous overload or short circuit of output
	Output Response Time	3 milliseconds ON and OFF
	Indicators	Entire translucent dome provides indicator light; either Job or Pick Sensed indicator inhibits the other light, depending on model. Job ("Pick") indicator: Green Pick Sensed indicator: Red or No indicator, depending on model
	Construction	Base: nylon Translucent dome: polycarbonate Lens: polycarbonate or acrylic
	Environmental Rating	Fully encapsulated, IEC IP67
	Connections	2 m 4-wire integral cable; 4-pin integral Euro-style QD (Q) or 4-pin 150 mm PVC pigtail Euro-style QD (QP), depending on model (see page 380)
	Operating Temperature	-20° to +50° C
	Hookup Diagrams	NPN models: MI34 (p. 500) PNP models: MI35 (p. 500)

338 More information online at bannerengineering.cgm