| ES-FA-9AA: 3 normally open output channels ES-FA-11AA: 2 normally open output channels and 1 normally closed auxiliary output channel. Each normally open output channel is a series connection of contacts from two forced-guided (positive-guided) relays, K1-K2. The normally closed contact 31-32 is a parallel connection of contacts from K1-K2. Contacts: AgNi, 5 urn gold-plated Low Current Rating: Caution: The 5 pm gold-plated contacts allow the switching of low current/low voltage. To preserve the gold plating on the contacts, the following max. values should not be exceeded at any time: Min. voltage: 1V ac/dc Max. voltage: 60V Min. current: 5 mA ac/dc Max. current: 300 mA Min. power: 5 mW (5 mVA) Max. power: 7 W (7 VA) High Current Rating: If higher loads must be switched through one or more of the contacts, the minimum and maximum values of the contact(s) changes to: Min. voltage: 15V ac/dc Max. voltage: 250V ac/dc Min. current: 30 mA ac/dc Max. current: 6 A (ES-FA-9AA) and 7A (ES-FA-11AA) Min. power: 5 W (5 VA) Max. power: 200 W (1,500 VA) Mechanical life: 50,000,000 operations Electrical life: ES-FA-9AA: 150,000 operations (typical, @ 200 W (1,500 VA) switched power, resistive load) ES-FA-11AA: 130,000 operations (typical, @ 200 W (1,750 VA) switched power, resistive load) Note: Transient suppression is recommended when switching inductive loads. Install suppressors across load. Never install suppressors across output contacts. |