Miniature Sensors - BANNER

Catalogue Miniature Sensors

www.bannerengineering.com

Page

/ 22

See other catalogues for BANNER

Text version of the page

T8 Series

Miniature Sensors

T8, 10-30V dc

ec I-

LU _l LLI

Û.


Models	Sensing Mode/LED*			Range	Cable**	Output Type	Excess Gain	Beam Pattern	Data Sheet
T86EV Emitter T86EVQ Emitter					2 m Threaded 3-Pin Pico Pigtail QD	—
T8AN6R T8AN6RQ					2 m Threaded 3-Pin Pico Pigtail QD	NPN/LO
T8RN6R T8RN6RQ		M		2.0 m	2 m Threaded 3-Pin Pico Pigtail QD	NPN/DO	EGCO-2 (p. 428)	BPO-2 (p. 450)	68669
T8AP6R T8AP6RQ	OPPOSED				2 m Threaded 3-Pin Pico Pigtail QD	PNP/LO
T8RP6R T8RP6RQ					2 m Threaded 3-Pin Pico Pigtail QD	PNP/DO
T8AN6D50 T8AN6D50Q					2 m Threaded 3-Pin Pico Pigtail QD	NPN/LO
T8RN6D50 T8RN6D50Q				50 mm	2 m Threaded 3-Pin Pico Pigtail QD	NPN/DO	EGCD-1	BPD-1
T8AP6D50 T8AP6D50Q				50 mm	2 m Threaded 3-Pin Pico Pigtail QD	PNP/LO	(p. 434)	(p. 456)
T8RP6D50 T8RP6D50Q					2 m Threaded 3-Pin Pico Pigtail QD	PNP/DO			67584
T8AN6D100 T8AN6D100Q		DIFFUSE	—		2 m Threaded 3-Pin Pico Pigtail QD	NPN/LO			67584
T8RN6D100 T8RN6D100Q				100 mm	2 m Threaded 3-Pin Pico Pigtail QD	NPN/DO	EGCD-2	BPD-2
T8AP6D100 T8AP6D100Q				100 mm	2 m Threaded 3-Pin Pico Pigtail QD	PNP/LO	(p. 434)	(p. 456)
T8RP6D100 T8RP6D100Q					2 m Threaded 3-Pin Pico Pigtail QD	PNP/DO

* —t Visible Red LED

** For 9 m cable, add suffix W/30 to the 2 m model number (example, T8AN6D50 W/30). A model with a pigtail QD requires a mating cable (see page 378).


	T8 Specifications
	Supply Voltage and Current	10 to 30V dc (10% max. ripple) at less than 25 mA (exclusive of load)
	Supply Protection Circuitry	Protected against reverse polarity and transient voltages
	Output Configuration	SPST solid-state switch NPN (current sinking) or PNP (current sourcing), depending on model. Light Operate (LO) or Dark Operate (DO), depending on model.
	Output Rating	50 mA max. Off-state leakage current: less than 1 uA at 24V dc On-state saturation voltage: less than 0.25V at 10 mA dc; less than 0.5V at 50 mA dc
	Output Protection Circuitry	Protected against false pulse on power-up and continuous overload or short circuit of outputs Overload trip point > 100 mA
	Output Response Time	1 millisecond ON and 0.5 milliseconds OFF NOTE: Maximum 100 milliseconds (150 milliseconds for Diffuse models) delay on power-up; output does not conduct during this time.
	Repeatability	Opposed models: 100 microseconds Diffuse models: 160 microseconds

More information online at bannerengineeringxqrn