| | | | |
| | WORLD-BEAM® Q12 Specifications | |
| | Supply Voltage and Current | 10 to 30V dc (10% max. ripple) @ 20 mA max. current | |
| | Supply Protection Circuitry | Protected against reverse polarity and transient voltages | |
| | Output Configuration | Bipolar: One NPN (current sinking) and one PNP (current sourcing); light operate (LO) or dark operate (DO), depending on model | |
| | Output Rating | 50 mA total across both outputs with overload and short circuit protection OFF-state leakage current: ON-state saturation voltage: NPN: 200 uA NPN: 1.25V @ 50 mA PNP: 10 uA PNP: 1.45V @ 50 mA | |
| | Output Protection Circuitry | Protected against false pulse on power-up; short-circuit protected. | |
| | Output Response Time | Opposed models: 1.3 milliseconds ON; 900 microseconds OFF All other models: 700 microseconds ON/OFF NOTE: 120 milliseconds delay on power-up; outputs do not conduct during this time. | |
| | Repeatability | 175 microseconds | |
| | Switching Frequency | Opposed models: 385 Hz All other models: 715 Hz | |
| | Indicators | Green ON steady—Power ON Green flashing—Output overloaded Yellow ON steady—Light sensed Yellow flashing—Marginal signal | |
| | Construction | Polarized Retroreflective models: Thermoplastic elastomer housing with glass lens All other models: Thermoplastic elastomer housing with polycarbonate lens | |
| | Environmental Rating | IEC IP67 | |
| | Connections | 2 m or 9 m attached PVC cable, or 150 mm pigtail with threaded 4-pin Pico-style quick-disconnect fitting. QD cables are ordered separately. See page 379. | |
| | Operating Conditions | Temperature: -20° to +55° C Storage temperature: -30° to +75° C Relative humidity: 90% max. @ 50° C (non-condensing) | |
| | Certifications | C € c^Hus | |
| | Hookup Diagrams | Emitters: DC03 (p. 476) DC Models: DC06 (p. 477) | |
| | | | |