WORLD-BEAM

®

QS30 Universal Voltage

Midsize Sensors

WORLD-BEAM

®

QS30 Universal Voltage Specifications

Supply Voltage 24 to 250V ac, 50/60 hz or 12 to 250V dc (1.0 watt max.) Supply Protection Circuitry Protected against transient voltages Output Configuration SPDT (Single-Pole Double-Throw) electromechanical relay output (all models except emitters)
PHOTOELECTRICS Output RatingMax. Switching Power (resistive load): 150 W, 1250 VA Max. Switching Voltage (resistive load): 250V ac; 125V dc Max. Switching Current (resistive load): 5 A @ 250V ac; 5 A @ 30V dc derated to 200 mA @ 125V dc Min. Voltage and Current: 5V dc, 10 mA Mechanical life of relay: 50 million operations Electrical life of relay at full resistive load: 100,000 operations Output Response 15 milliseconds ON/OFF Delay at Power-Up 100 millisecond delay; output does not conduct during this time. Indicators2 Led indicators on sensor top: Green ON steady: Power ON Yellow ON steady: Light sensed Yellow flashing: Marginal excess gain (1.0 to 1.5X excess gain) Large, oval LED indicator on sensor back (except emitters): Yellow ON steady: Output conducting Construction ABS housing; Acrylic lens cover Environmental Rating IEC IP67; NEMA 6 Connections 2 m or 9 m 5-wire PVC cable. Operating ConditionsTemperature: -20° to +70° C Relative humidity: 90% @ 50° C (non-condensing) Certifications Hookup DiagramsEmitters: UN02 (p. 487) All other models: UN01 (p. 487)

114

More information online at

bannerengineering.com