| | | For 9 m cable, add W/30 to the 2 m model number (example, QS30LLPC W/30). A QD model requires a mating cable (see page 382). Retroreflective range is specified using one model BRT-36X40BM retroreflector. Actual sensing range may differ, depending on efficiency and reflective area of the retroreflector in use. See Accessories for more information. | | |
| | | Pulse Power < 5.6 mW, 650 - 670 nm, 15 kHz, 4.5 uS Pulse. Complies to 21 CFR 1040.10 & EN60825-1:2001 except for deviations pursuant to laser notice No. 50, dated 7-26-01. LASER LIGHT - DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT | | |
| | | Lasers that are safe under reasonably foreseeable conditions of operation, including the use of optical instruments for intrabeam viewing. Reference 60825-1 Amend. 2 © IEC:2001 (E), section 8.2. For safe laser use: • Do not permit a person to stare at the laser from within the beam. • Do not point the laser at a person's eye at close range. • Locate open laser beam paths either above or below eye level, where practical. | | Class 2 Lasers Lasers that emit visible radiation in the wavelength range from 400 to 700 nm where eye protection is normally afforded by aversion responses, including the blink reflex. This reaction may be expected to provide adequate protection under reasonably foreseeable conditions of operation, including the use of optical instruments for intrabeam viewing. Reference 60825-1 Amend. 2 © IEC:2001(E), section 8.2. For safe laser use: • Do not permit a person to stare at the laser from within the beam. • Do not point the laser at a person's eye at close range. • Locate open laser beam paths either above or below eye level, where practical. | | |