MINI-ARRAY

Series

A-GAGE

Sensors

MINI-ARRAY

Sensor Specifications

Emitter/Receiver Range 9.5 mm beam spacing 19.1 mm beam spacingArray Length 143 to 1057 mm:
Max range is specified at the point where 3x excess gain remains. 0.6 to 6.1 m Array Length 133 to 1057 mm: 0.9 to 17 m Array Length 1210 to 1819 mm: 0.6 to 4.6 m Array Length 1200 to 1810 mm: 0.9 to 14 m Minimum Object Sensitivity9.5 mm Beam Spacing 19.1 mm Beam SpacingStraight, Edge Modes: 19.1 mm Straight, Edge Modes: 38.1 mm Interlaced Mode: 12.7 mm* 19.1 mm Interlaced Mode: Straight, Edge Modes: 25.4 mm* 38.1 mm Skip Mode: With DeviceNet Controller: With DeviceNet Controller: Straight, Edge Modes: Multiply the above by the number Skip Mode: Multiply the above by the number of skipped beams, plus 1 of skipped beams, plus 1 Interlaced Mode: 12.7 mm* Interlaced Mode: 25.4 mm**Assumes sensing is in the middle
1 /
3 of sensing range. Sensor Scan Time 55 microseconds per beam, plus 1 millisecond post process time per scan. DeviceNet: Post process time will vary, based on the number of channels interrogated during each scan.
† Power Requirements 9.5 mm beam spacing 19.1 mm beam spacing
Maximum current is for a 6' sensor. 12V dc ±2%, supplied by controller 12V dc ±2%, supplied by controller Emitter: 0.10 A @ 12V dc Emitter: 0.10 A @ 12V dc Receiver spacing: 0.75 A @ 12V dc
† Receiver spacing: 0.50 A @ 12V dc
† Connections Sensors connect to controller using 5-conductor Mini-style quick-disconnect cables (one each for emitter and receiver), ordered separately. Use only Banner cables, which incorporate a “twisted pair” for noise immunity. Cables measure 8.1 mm dia. and are shielded and PVC-jacketed. Conductors are 20 gauge. Emitter and receiver cables may not exceed 75 m long, each. See page 388. Status IndicatorsEmitter: Red LED lights to indicate proper emitter operation Receiver: Green indicates sensors aligned (> 3x excess gain) Yellow indicates marginal alignment of one or more beams (1 x
MEASUREMENT & INSPECTION Construction Aluminum, with black anodized finish; acrylic lens cover Environmental Rating NEMA 4, 13; IP65 Operating ConditionsTemperature: -20° to +70° C Relative humidity: 95% at 50° C (non-condensing)

More information online at

bannerengineering.com 317