EZ-LIGHT

™

Indicators: Model Selection & Specifications

EZ-LIGHT, Multi-Color, General Purpose (cont’d)*

Downloa d PDF ModelsConstructionConnection**LED FunctionInputsData Sheet T30XRYPQ 30 mm mountThermoplastic polyester4-pin Euro QD PNP T30XRYNQNPNK50LXRYPQ 30 mm mountThermoplastic polyester 2 Color: PNPK50LXRYNQNPNT8LXRYPQP Red,Yellow 121899 8 mm mountPolycarbonate4-pin Euro Pigtail QD
Other ColorsAvailable PNPT8LXRYNQPNPN

EZ-LIGHT, Multi-Color, 7-Function

Downloa d PDF ModelsConstructionConnection**LED FunctionInputsData Sheet M18GRY2PQ 18 mm mountNickel-plated brass4-pin Euro QD PNP M18GRY2NQNPNT30GRY2PQ 30 mm mountThermoplastic polyester Choose Red,Yellow or Green ON,flashing or alternating PNPT30GRY2NQNPNK50LGRY2PQ PNP
† 121902 30 mm mountThermoplastic polyester
Other Colors Available PNPK50LGRY2NQNPN

EZ-LIGHT, 2-Color for Sensor Emulation

Downloa d PDF ModelsConstructionConnection**LED FunctionInputsData Sheet M18GYX7PQ 18 mm mountNickel-plated brass4-pin Euro QD M18GYX7NQNPNT18GYX7PQ 18 mm mountThermoplastic polyester PNPT18GYX7NQNPNT30GYX7PQ Use with photoelectric and proximity sensors to duplicate the sensor’s indicator function. When the sensor is powered, the indicator is Green. When the sensor’s output is energized, the indicator is Yellow. 30 mm mountThermoplastic polyester
†† PNPT30GYX7NQNPNK50LGYX7PQ 121900 30 mm mountThermoplastic polyester PNPK50LGYX7NQNPNT8LGYX7PQP 8 mm mountPolycarbonate4-pin Euro Pigtail QD PNPT8LGYX7NQPNPN
†† * Single-color models are available. Lights are independently selectable. Contact factory for other colors and color combinations.** QD models are listed. For 2 m cable model, omit suffix Q from model number (example, M18GRY2P ). A model with a QD requires a mating cable (see page 22-23). † If cables other than Banner 4-pin Euro QD are used, a 5-pin cable may be required. † † For use with 4-pin Euro-style QD cables or with Splitter cable, CSB-M12... (see page 23).

EZ-LIGHT Indicator Light Specifications

Supply Voltage and Current indicator Flash Rate

K50L: 18 to 30V dc @ 75 mA max. M18 & T18: 10 to 30V dc @ 50 mA max. Multi-Color, 7-Function models only: Single color: T30: 10 to 30V dc @ 75 mA max. T8L: 10 to 30V dc @ 20 mA max. 1 second flash rate (500 milliseconds ON)

Indicators

Alternating colors: 1.5 second rotation rate (500 milliseconds per color) General Purpose and Multi-Color, 7-Function models: Independently selected LEDs: Green, Red, Yellow

Environmental Rating

Fully encapsulated, IEC IP67

Connections

4-wire or 5-wire 2 m attached cable, or 4-pin integral Euro-style QD, or 150 mm pigtail with 4-pin Euro-style QD, depending on model 2-color for Sensor Emulation: Green and Yellow, when connected to sensors. For other colors/combinations, contact factory for availability.

Input Response Time Operating Temperature

-20° to +50° C Multi-Color, 7-Function models only:Indicator ON: 250 milliseconds max. Indicator OFF: 10 milliseconds max.

Hookup Diagrams

Page 21

More information online at

bannerengineering.com

15