Text version of the page 
Text version of the page 
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Q45 Series | | | | | | | | | | Fullsize Sensors | | | | | | | | | | Q45 NAMUR, 5-15V dc (cont'd) | | | | | | u oc ru LLI _l LU o r- o X Û. | | | | | | | | | | | | | | | | | | | | | | | Models | Sensing Mode/LED* | Range | Cable** | Output Type | Excess Gain | Beam Pattern | Data Sheet | | | | Q45AD9F Q45AD9FQ | GLASS FIBER | Range varies by sensing mode | 2 m 4-Pin Euro QD | Constant Current <1.2 mA dark >2.1 mA | EGCG-26 & EGCG-27 (p. 445) | BPG-26 & BPG-27 (p. 463) | | | | | Q45AD9FV Q45AD9FVQ | □=!=> GLASS FIBER | and fiber optics used | 2 m 4-Pin Euro QD | EGCG-28 & EGCG-29 (p. 445) | BPG-28 & BPG-29 (p. 463) | 38343 | | | | Q45AD9FP Q45AD9FPQ | □=!=» PLASTIC FIBER | Range varies by sensing mode and fiber optics used | 2 m 4-Pin Euro QD | light | EGCP-22 & EGCP-23 (p. 448) | BPP-22 & BPP-23 (p. 466) | | | | | | | | | | | | | | | | | | | | | | | | | | | | For 9 m cable, add suffix W/30 to the 2 m model number (example, Q45AD9F W/30). A model with a QD requires a mating cable (see page 381). | | | | | | | | | | | | | | | | | Q45 NAMUR Specifications | | | | Supply Voltage and Current | 5 to 15V dc. Supply voltage is provided by the amplifier to which the sensor is connected. | | | | Output | Constant current output: < 1.2 mA in the dark condition and > 2.1 mA in the light condition | | | | Output Response Time | Opposed mode receiver: 2 milliseconds ON/0.4 milliseconds OFF All others: 5 milliseconds on/off (does not include amplifier response) | | | | Adjustments | Multi-turn sensitivity control on top of sensor, beneath a transparent o-ring sealed Lexan® cover, allows precise sensitivity setting (turn clockwise to increase gain). | | | | Indicators | Indicator LED's are highly visible, located beneath a raised transparent Lexan® dome on top of the sensor. Power (red) LED (emitters only) lights whenever 5 - 15V dc power is applied Signal (red) LED lights whenever the sensor sees its modulated light source | | | | Construction | Molded thermoplastic polyester housing, o-ring sealed transparent Lexann® top cover, molded acrylic industrial lenses, and stainless steel hardware. Q45s are designed to withstand 1200 psi washdown. The base of cabled models has a /2" NPS integral internal conduit thread. | | | | Environmental Rating | NEMA 6P; IEC IP67 | | | | Connections | PVC-jacketed 2 m or 9 m cables, or 4-pin Euro-style quick-disconnect (QD) fitting are available. QD cables are ordered separately. See page 381. | | | | Operating Conditions | Temperature: -40° to +70° C Relative humidity: 90% at 50° C (non-condensing) | | | | Design Standards | Q45AD9 Series sensors comply with the following standards: DIN 19 234, EN 50 014 Part 1. 1977, EN 50 020 Part 7. 1977 | | | | Certifications | | | | | Hookup Diagrams | SP02 (p. 489) | | | | | | | | | | | | | | | | | | | | | | | | | | APPROVALS | | | | CSA: | #LR41887 | Instrinsically Industrial safe, with Entity for Class I, Groups A-D Class I, Div. 2, Groups A-D | | | | FM: | #J.I. 5Y3A4.AX | Intrinsically Safe, with Entity for Class I, II, III, Div. 1, Groups A-G Class I, II, III, Div. 2, Groups A-D and G | | | | KEMA: | #03 ATEX 1441x | II IG EEx ia IICTC | | | | ETL: | #553868 | Tested per FM and CSA as shown above | | | | | | | | | | | | | | | | | | 152 More information online at bannerengineeringxqirn | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
|