D10 Series

Fiber Systems

PHOTOELECTRICS

D10 Expert

™

with Numeric Display—Dual-Discrete Specifications

Required Fiber optic cable manufacturer Banner P-Series plastic fibers (See Plastic Fiber Optic section, page 182) Supply Voltage and Current 12 to 24V dc (10% max. ripple) at less than 65 mA, exclusive of load Supply Protection Circuitry Protected against reverse polarity and transient voltage. Output Configuration Two independently configured current sourcing (PNP) or current sinking (NPN) solid-state transistors. Output Rating 150 mA max. load OFF-state leakage current: less than 10 µA at 24V dc ON-state saturation voltage: NPN less than 1.5V at 150 mA load PNP less than 2.5V at 150 mA load Output Protection Circuitry Protected against false pulse on power-up and continuous short-circuit Output Response Time Programmable, 50 microseconds, 200 microseconds, 1 millisecond, 2.5 millisecondsNOTE: < 1 second delay on power-up; outputs do not conduct during this time. Adjustments Two push buttons or remote programming of (TEACH) switching threshold response time, OFF-delay, light/dark operate, and display Indicators Four-digit digital display plus Led indicators for active channel, push-button lockout, OFF-delay and light/dark operate selection; two yellow LEDs serve as output indicators and active channel indicator. Construction Black ABS/polycarbonate alloy (UL94 V-0 rated) housing, clear polycarbonate cover. Environmental Rating NEMA 1; IEC IP50 Connections PVC-jacketed 2 m or 9 m 6-wire integral cable or integral 6-pin Pico-style quick-disconnect fitting. QD cables are ordered separately. See page 379. Operating ConditionsTemperature: -20° to +55° C Storage Temperature: -20° to +80° C Relative humidity: 90% @ 50° C Number of Devices StackedAmbient Temperature RatingLoad Specification 355° C150 mA750° C50 mA1045° C50 mA Installation 35 mm DIN rail or included mounting bracket Certifications Hookup DiagramsNPN Models: DC21 (p. 481) PNP Models: DC22 (p. 481)

D10 Expert

™

with Numeric Display—Analog/Discrete Specifications

Required Fiber Optic Cable Banner P-Series plastic fibers (See Plastic Fiber Optic section, page 182) Supply Voltage and Current4-20 mA Analog Models: 12-24V dc (10% max. ripple) at less than 65 mA exclusive of load 0-10V dc Analog Models: 15-24V dc (10% max. ripple) at less than 70 mA exclusive of load Supply Protection Circuitry Protected against reverse polarity and transient voltage. Output Configuration 2 independently configurable outputs, depending on model: NPN w/analog (4-20 mA or 0-10V) or PNP w/analog (4-20 mA or 0-10V) Output RatingDiscrete Output: 150 mA, max. load Analog Output: 4-20 mA or 0-10V dc OFF-state leakage current: < 10 µA at 24V dc Load: 4-20 mA Models: 100 max. impedance ON-state saturation voltage: NPN < 1.5V @ 150 mA PNP < 2.5V @ 150 mA 0-10V dc Models: 1 M min. impedance Output Protection Circuitry Protected against false pulse on power-up and continuous short-circuit Output Response TimeDiscrete Output: Programmable, 50 microseconds, 200 microseconds, 1 millisecond, 2.5 milliseconds Analog Output: 1 millisecondNOTE: < 1 second delay on power-up; outputs do not conduct during this time. Adjustments Push-button or remote programming of (TEACH) switching threshold response time, OFF-delay, light/dark operate, and display Indicators Four-digit digital display plus LED indicators for active channel, push-button lockout, OFF-delay and light/dark operate selection; two yellow output indicators.

More information online at

bannerengineering.com 169