Glass Fiber Optics

Fiber Systems

– STATIC DOLOOFFDelay SETUP PHOTOELECTRICS Switch Point DYNAMIC +

* Range data for QS18F not available at printing. M600 Available 315° C (600°F) models. Add M600 to end of model number (ex: BA23S M600 ). R55FSME312 D12ED12 QS18* M90 Available 480° C (900°F) models. Add M900 to end of model number (ex: BA23S M900 ).

CORE DIA. MIN. BEND MODEL NUMBER DRAWING & DIMENSIONS (mm) RADIUS (mm) FEATURES TYPICAL RANGE (mm)

91425.4 ø 4.7 ø 7.4 PVC shrinkjunction ø 5.3 ø 5.1 ø 4.8ø 3.05

BA1.53SMETA 2.29 19

• Ultra-compact head

stainlesssteel 12.7 12.7 12.7 38.1

Detailed Dimensions Online

191

M600

251255075100150 91435.1 ø 4.7 ø 7.4 PVC shrink junction ø 5.3 ø 6.4ø 3.05

BA1.53SMTA 2.29 19

• Compact head

stainlesssteel 12.7 12.7 38.1

Detailed Dimensions Online

191

M600

251255075100150 PVC shrinkjunctionø 7.4ø 4.738.112.712.7191 ø 8.0ø 6.4stainlesssteel5/16-24 thd brass2 jam nuts included
SIDE-VIEW

BTETA1.53S

• Ultra-compact head; thread

38.112.7

2.29 19

Detailed Dimensions Online

91425.4ø 4.8ø 3.055.3

M600

251255075100150 ø 4.7
† ø 4.0 Teflon
® shrinkjunction stainlesssteel ø 4.2 M4 x 0.7stainless steel

BMT13SMVF

• Miniature thread; entire cable withstands 480° C (900° F)

ø 3.0 15.0

1.57 19

29.0 ø 3.0

Detailed Dimensions Online

150914
DIFFUSE VACUUM

Contact factory representative for range information

ref. glass fiber key or call factory ref. glass fiber key or call factory

• Glass lens; withstands 315° C (600° F)• Focuses light to .80 mm with ø 1.6 mm fiber

L10

ø 14.3 45.7 5/16" - 24 threadlens optic

Detailed Dimensions Online

CONVERGENT BEAM SPOT

Glass Fiber Optics—Additional Models Available

In addition to the configurations shown, Banner offers thousands of readily available alternative fiber models:

More ModelsAvailable!

• Substitute PVC over monocoil sheathing for stainless steel.• Reduce or increase glass fiber optic bundle diameters. Example: Change ø 3.18 mm bundle to ø 1.57 mm.• Substitute a rectangular-shaped fiber bundle (0.5 mm x 2.5 mm) for a circular bundle. • Change endtip material from brass to stainless steel. • Modify straight or angled probe tip dimensions. • Modify overall fiber length in intervals of 305 mm (standard lengths are 914 mm and 610 mm).

More information online at

bannerengineering.com 201