| | | | |
| | D12 Expert" Specifications | |
| | Supply Voltage and Current | 10 to 30V dc at 45 mA ma*, (exclusive of load); 10% ma*, ripple | |
| | Supply Protection Circuitry | Protected against reverse polarity and transient voltages | |
| | Output Configuration | NPN open collector (both outputs) or PNP open collector (bold outputs), depending on model Load output; NO and programmable Light or Dark-Operate; | |
| | Output Hating | Off-state leakage current: less than 10 pA at 30V dc On-state saturation voltage: less than 1 volt at 10 mAdcand less than 1.5 volts at 150 inA dc. The total load may not exceed 150 mA | |
| | Output Protectian Circuitry | Protected again;t list :n.lss on powci is and a'loil c:!cisi of outputs (trips at 175 mA) | |
| | Oiitpul Response Time | 200 microseconds ON/OFF (40 milliseconds OFF when OFF-delay selected) (NOTE: False pulse protect cm ; ic;iil causes a 0.1 second delay on power-up) | |
| | Output Operation Mode | Light operate or dark operate: selected by push button | |
| | Output Timing Functions | ON/OFF (no delay) or fixed 40 millisecond OFF-delay; selected by push button | |
| | Repeatability | 65 microseconds | |
| | Adjustments | Push-button teach mode sensitivity setting; Ramole teaching input i., | |
| | | Green LED lights tin IX] p nv.-i?; "N ,viri Ingres ■.vIkh i,;n::v tor le.ich T.or:e 1 II; ■.■.■hen -eady to learn first condition; 2 H! for second condition Yellow LED lights lor load output ON (conducting) 7-segmenl moving dot red LED disp .:■.■ locales 'clat ■.■■: ■ecc/ed lishl 3'gnal strength, oulput program setllngs. | |
| | Mounting Bracket | D12 Sensors mount directly to a standard DIN rail, or may be through-hole mounted using the supplied mounling | |
| | | | |