| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Objective: Measure height, length and width of boxes for storage and collect profile information for shipping. | | | | |
| | | |
| | | Description: The outer and inner diameter of each tyre is determined. The controller determines if the tyre is one of two required sizes, and directs it down the corresponding conveyor. If the tyre is found to be of neither size, it is sent to a reject bin. | | |
| | | |
| | | Description: The boxes pass through vertical, horizontal or perpendicular mounted EZ-ARRAY pairs to determine where the proper storage location should be. | | |
| | | |
| | | |
| | | 3-Digit Diagnostic Display | | |
| | | Dip Switch Configuration | | |
| | | Log Diameter | | |
| | | |
| | | |
| | | |
| | | Alignment/ Blanking System Status | | |
| | | Bi-Colour Zone Indicators | | |
| | | |
| | | |
| | | Modbus Activity | | |
| | | |
| | | Modbus Error | | |
| | | |
| | | Objective: Determine the diameter of a log before it has entered a station used for bark removal. | | |
| | | |
| | | Description: An EZ-ARRAY determines the diameter of the log by the total number of beams blocked, to adjust the log grippers and bark removing blades for process stability. | | |
| | | more advanced settings | | |
| | | |
| | | |
| | | BANNER ENGINEERING EUROPE Park Lane, Culliganlaan 2F Tel: +32 2 456 07 80 E-mail: mail@bannereurope.com 1831 Diegem • Belgium Fax: +32 2 456 07 89 Web: www.bannereurope.com | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |