| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | | | |
| | | |
| | | Rope Pull Switches | | |
| | | |
| | | RP-QM90 Model | | |
| | | |
| | | (TOO) | | |
| | | RP-QM90 Series, 90 mm | | |
| | | |
| | | Download \1PDF | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | Model | Actuation | Max. Rope Length | Safety Auxiliary Contacts** Contacts | Action/ Contact State** | Contact Config. & Switch Diagram | Data Sheet | | | | RP-QM90F-100L | Latch (Rope Pulled) | 100 m | 2 NC | 2 NO in | Safety Auxiliary ( open open closed closed [ ) open open closed closed | SD035 (p. 245) | 62086 | | | | | | | | | | | | | | | |
| | | |
| | | Run Position LJrVJ Cable Pulled —— Cable Break NC = Normally Closed Contact, NO = Normally Open Contact See data sheet or Contact Configuration and Switching Diagrams for more information/clarification. | | |
| | | |
| | | Rope Pull Switches Specifications | | |
| | | |
| | | Contact Rating | | 10A @ 24V ac, 10A @ 110V ac, 6A @ 230V ac 6A @ 24V dc 2.5 kV max. transient tolerance NEMA A300 P300 | | |
| | | |
| | | E-STOP BUTTONS | | |
| | | |
| | | |
| | | European Rating | | Utilization categories: AC15 and DC13 LU 500V ac Ith= 10A | | |
| | | 40-60 Hz | | |
| | | ROPE PULL SWITCHES | | |
| | | |
| | | | | | | | | | | u, V* | I/AC-15 * A | I/DC-13 * A | | | | 24 | 10 | 6 | | | | 110 | 10 | 1 | | | | 230 | 6 | 0.4 | | | | | | | | | | |
| | | |
| | | |
| | | |
| | | |
| | | Contact Material | | Silver-nickel alloy | | |
| | | |
| | | |
| | | Maximum Switching Speed | | 50 operations per minute | | |
| | | |
| | | |
| | | Recommended Rope Size | | 40 mm models: 2 mm diameter steel rope 42 & 72 mm models: 3 mm diameter steel rope 90 mm models: 4 mm diameter steel rope | | |
| | | |
| | | |
| | | More information online at bannerengineeringxciiri 171 | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |