Rope Pull Switches
Rope Pull Switches Specifications (cont’d) Rope Pull Switches Specifications
Maximum Rope Pull LengthRP-LM40D-6/6L: 6 m RP-LS42F-75L/75LE/75LF: 75 m RP-QM72D-6L: 6 m RP-QM72D-12L: 12 m RP-QMT72D-20L: 20 m RP-QMT72E-12L: 12 m RP-QMT72F-12L: 12 m RP-QM90F-100L: 100 mm; equal lengths up to 50 m on either side of switch Short Circuit Protection 10 amp Slow Blow, 15 amp Fast Blow. Recommended external fusing or overload protection. Mechanical Life 1 million operations Wire Connections Screw terminals with pressure plates accept the following wire sizes – Stranded and solid: 20 AWG (0.5 mm
2 ) to 16 AWG (1.5 mm
2 ) for one wire Stranded: 20 AWG (0.5 mm
2 ) to 18 AWG (1.0 mm
2 ) for two wires Cable Entry M20 x 1.5 threaded entranceAdapter supplied to convert M20 x 1.5 to ½" - 14 NPT threaded entrance ConstructionRP-LS42F-75L/75LE/75LF: High-impact thermoplastic housing; zinc die-cast actuator All others: Aluminum alloy die cast Environmental RatingRP-LS42F-75L/75LE/75LF: NEMA 4; IEC IP67 All other models: NEMA 4; IEC IP65 Operating TemperatureRP-LS42F-75L/75LE/75LF: -25° to +70° C All other models: -30° to +80° C WeightRP-LM40D-6: 0.22 Kg RP-LM40D-6L: 0.26 Kg RP-LS42F-75L: 0.48 Kg RP-LS42F-75LE and RP-LS42F-75LF: 0.65 Kg RP-QM72D-6L: 0.49 Kg RP-QM72D-12L: 0.52 Kg RP-QMT72D-20L, RP-QMT72E-12L and RP-QMT72F-12L: 0.64 Kg RP-QM90F-100L: 3.8 Kg Certifications For a list of certifications see page 238. Contact Configurations and Switching DiagramsRP-LM40 models: SD027 & SD028 (p. 244) RP-LS42 models: SD029 (p. 244) RP-QM72/QMT72 models: SD030, SD031, SD032, SD033 & SD034 (pp. 244-245) RP-QM90 models: SD035 (p. 244)
EMERGENCY STOP DEVICES E-STOPBUTTONS ROPE PULLSWITCHES 172
More information online at
bannerengineering.com