| | | | |
| | | | |
| | Supply Voltage and Current | 10 to 30V dc (10% maximum ripple) @ less than 45 mA, exclusive of load | |
| | Delay at Power-Up | 200 milliseconds max.; outputs do not conduct during this time | |
| | Output Configuration | Bipolar: 1 current sourcing (PNP) and 1 current sinking (NPN) | |
| | Output Rating | 150 mA maximum load OFF-state leakage current: less than 5 uA @ 30V dc ON-state saturation voltage: NPN: less than 200 mV @ 10 mA and 1V @ 150 mA load PNP: less than 1V @ 10 mA and 1.5V @ 150 mA load | |
| | Output Response Time | 500 milliseconds (normal mode) or 200 milliseconds (high-speed mode) | |
| | Repeatability | 100 milliseconds (normal mode) or 66 milliseconds (high-speed mode) | |
| | Adjustments | 2 push buttons and remote wire • Expert TEACH programming (two-point static, dynamic and single-point static) • Manually adjust (+/-) sensitivity (using buttons only - not available on remote wire) • LO/DO, OFF-delay, and response speed configurable (using buttons or remote wire) • Push-button lockout (using remote wire only) Factory Default Settings: light operate, normal speed, no delay | |
| | Indicators | 8-segment red bargraph: Light-to-dark signal difference relative to taught condition (Single-Point TEACH ) Sensing contrast (two-point TEACH) Green status indicators: LO, DO, high speed (HS) and OFF-delay Green LED: Power ON Yellow LED: Output conducting | |
| | Connections | PVC-jacketed 2 m or 9 m 6-wire integral cable, or integral 6-pin Pico-style quick-disconnect fitting. QD cables are ordered separately. | |
| | Operating Conditions | Temperature: -10° to +55° C Storage temperature: -20° to +85° C Relative humidity: 90% @ 50° C | |
| | Certifications D10 - Discrete | C€ | |
| | Supply Voltage | 10 to 30V dc (10% maximum ripple) @ less than 25 mA, exclusive of load. | |
| | Output Configuration | Bipolar: 1 current sourcing (PNP) and 1 current sinking (NPN). | |
| | Output Rating | 100 mA per output with short circuit protection OFF-state leakage current: less than 10 uA sourcing; 200 uA sinking ON-state saturation voltage: NPN: 1.6V @ 100 mA PNP: 2.0V @ 100 mA | |
| | Output Response Time | Standard models (with cross-talk avoidance circuitry): 500 microseconds High-speed models: 200 microseconds | |
| | Repeatability | Standard models: 95 microseconds High-speed models: 50 microseconds | |
| | Adjustments | | |
| | Indicators | Yellow flashing—Light Sensed Signal strength indicator (Banner's AID™ Alignment Indicator Device - the faster the flash, the more light is received). | |
| | Connections | PVC-jacketed 2 m or 9 m integral cable, or integral 4-pin Pico-style quick-disconnect fitting. QD cables are ordered separately. | |
| | Operating Conditions | Temperature: -10° to +55° C Storage: -20° to +85° C Relative humidity: 90% @ 55° C (non-condensing) | |
| | Certifications | Approvals in process. | |
| | | | |