Catalogues - d10-high-performance-fiber-optic-sensor

Catalogue D10 High Performance Fiber Optic Sensor

Page

/ 28

Make a request

/ 28

Text version of the page

Hi D10 Series: Specifications


	D10 Series - ALL MODELS
	Required Industrial fiber optic cable	Banner P-Series plastic fibers (See Plastic Fiber Optic section, page 14)
	Sensing Beam	Visible red, 680 nm, or 64 nm or visible green, 525 nm, depending on model
	Supply Protection Circuitry	Protected against reverse polarity and transient voltage
	Output Protection Circuitry	Protected against false pulse on power-up and continuous short-circuit
	Construction	Black ABS/polycarbonate alloy (UL94 V-0 rated) housing, clear polycarbonate cover
	Environmental Rating	NEMA 1; IEC IP50
	Installation	35 mm DIN rail or included mounting bracket

D10 Expert with Numeric Display - Dual-Discrete


Supply Voltage and Current	12 to 24V dc (10% maximum ripple) @ less than 65 mA, exclusive of load
Output Configuration	Two independently configured current sourcing (PNP) or current sinking (NPN) solid-state transistors
Output Rating	150 mA maximum load OFF-state leakage current: less than 10 uA @ 24V dc ON-state saturation voltage: NPN: less than 1.5V @ 150 mA load, PNP: less than 2.5V @ 150 mA load
Output Response Time	Programmable, 50 microseconds, 200 microseconds, 1 millisecond, 2.5 milliseconds NOTE: less than 1 second delay on power-up; outputs do not conduct during this time
Adjustments	2 push buttons or remote programming (TEACH) of switching threshold response time, OFF-delay, light operate (LO)/dark operate (DO), and display
Indicators	4-digit digital display plus Led indicators for active channel, push-button lockout, OFF-delay and light operate (LO)/dark operate (DO) selection; two yellow LEDs serve as output indicators and active channel indicator
Connections	PVC-jacketed 2 m or 9 m 6-wire integral cable, or integral 6-pin Pico-style quick-disconnect fitting. QD cables are ordered separately
Operating Conditions	Temperature: -20° to +55° C Storage temperature: -20° to +80° C Relative humidity: 90% @ 50° C
	Number of Devices Stacked	Ambient Temperature Rating	Load Specification
	3	55° C	150 mA
	7	50° C	50 mA
	10	45° C	50 mA
Certifications

D10 Expert with Numeric Display - Analog/Discrete


Supply Voltage and Current	4-20 mA analog models: 12-24V dc (10% maximum ripple) @ less than 65 mA exclusive of load 0-10V dc analog models: 15-24V dc (10% maximum ripple) @ less than 70 mA exclusive of load
Output Configuration	2 independently configurable outputs, depending on model: NPN w/analog (4-20 mA or 0-10V) or PNP w/analog (4-20 mA or 0-10V)
Output Rating	Discrete output: 150 mA, max. load OFF-state leakage current: less than 10 uA @ 24V dc ON-state saturation voltage: NPN: less than 1.5V @ 150 mA PNP: less than 2.5V @ 150 mA	Analog output: 4-20 mA or 0-10V dc Load: 4-20 mA models: 100n max. impedance 0-10V dc models: 1 Mn max. impedance
Output Response Time	Discrete output: Programmable, 50 microseconds, 200 microseconds, 1 millisecond, 2.5 milliseconds Analog output: 1 millisecond NOTE: less than 1 second delay on power-up; outputs do not conduct during this time.
Adjustments	2 push buttons or remote programming (TEACH) of switching threshold response time, OFF-delay, light operate (LO)/dark operate (DO), and display
Indicators	4-digit digital display plus LED indicators for active channel, push-button lockout, OFF-delay and light operate (LO)/dark operate (DO) selection; two yellow output indicators
Connections	PVC-jacketed 2 m or 9 m 6-wire integral cable, or integral 6-pin Pico-style quick-disconnect fitting. QD cables are ordered separately

io More information online at bannerengineeringxam