MINI-BEAM
® Expert
™ Ser i es
Compact Sensors
MINI-BEAM
® Expert
™ Sensors
PHOTOELECTRICS Retroreflective, Diffuse and Convergent ModelsSuffix LV, LP, D, DV, CV, CV2, CVG, CVB and CVW >
Simple push-button programming or remote TEACH via wire Dual-LED multi-function indicators
30.7 mm 12.2 mm30.7 mm
51.8 mm 2 m or 9 m integral cable, or Euro-style quick disconnect fitting Popular 18 mm threaded lens mount
12.2 mm 66.0 mm DetailedDimensions 12.2 mm30.7 mm
54.8 mm Diffuse ModelsSuffix W >
69.9 mm
12.2 mm30.7 mm Plastic Fiber ModelsSuffix FP, FPG, FPB and FPW Glass Fiber ModelsSuffix F, FV, FVG, FVB and FVW >
MINI-BEAM
® Expert
™ , 10-30V dc
DownloadPDF ModelsSensing Mode/LED*RangeCable**OutputTypeExcess GainBeam PatternData Sheet
SME312LP >
P
2 m 10 mm - 3 m >
† EGCR-14(p. 431)BPR-13(p. 453) SME312LPQD >
POLAR RETRO 5-Pin Euro QD 55214 SME312LPC*** SME312LPCQD*** >
P
1 m2 mEGCR-15(p. 431)BPR-14(p. 453) >
POLAR RETROCLEAR OBJECT 5-Pin Euro QD SME312D 380 mm2 mEGCD-16(p. 434)BPD-15(p. 456) >
BipolarNPN/PNP
SME312DQD >
DIFFUSE 5-Pin Euro QD SME312DV 1100 mm2 mEGCD-18(p. 435)BPD-17(p. 457) 55214 SME312DVQD >
DIFFUSE 5-Pin Euro QD SME312W 130 mm2 mEGCD-17(p. 435)BPD-16(p. 456) SME312WQD >
DIFFUSEDIVERGENT 5-Pin Euro QD >
* INFRARED LED W/30 to the 2 m model number (example, Visible Red LED** For 9 m cable, add suffix SME312D W/30 ). A model with a QD requires a mating cable (see page 382).*** NOTE: For clear object detection, sensing range varies, according to the efficiency and reflective area of the retroreflector(s) used. For these low-contrast applications, the model BRT-2X2 reflector is recommended and is included with each SME312LPC(QD) sensor. • For applications with high vibration, the model BRT-51x51BM, with its micro-prism geometry, is recommended.
• For long-range applications, the BRT-77X77C reflector provides a range up to 2 m.
• SME312LPC(QD) are for use with corner cube type reflectors only; reflective tape is not recommended. See page 391 for more information. † NOTE: Retroreflective range is specified using one model BRT-3 retroreflector, unless otherwise noted. Actual sensing range may differ, depending on the efficiency and reflective area of the retroreflector used. See Accessories section for more information. More i nformat i on onl i ne at >
bannereng i neer i ng . com 81