Text version of the page

PVD Ser i es

EZ-LIGHT

™

P i ck-to-L i ght Sensors

Temperature Sensors - 7106 PVD Specifications (cont’d) PVD Specifications

Output Rating 150 mA max. Off-state leakage current: less than 10 mA On-state saturation voltage: NPN: less than 1.0V dc at 150 mA PNP: less than 2.0V dc at 150 mA Output Protection Circuitry Protected against false pulse at power-up and short circuit of outputs Output Response Time 400 milliseconds (Includes standard 100 milliseconds ON-delay and 100 milliseconds OFF-delay) Delay at Power-Up Less than 1.0 second IndicatorsGreen: LED to indicate power ON/OFF Yellow: LED to indicate output ON/OFF Job Light: (Diffused Green LED) Turned ON and OFF by applying an external signal to the Job input (white wire). The job lights will be active high or active low, depending on user selection of DIP switch 4. Error Light: (Diffused Red LED) Turned ON and OFF by detection of an output event when job light is not ON. Adjustments4 DIP switches, located behind access panel († denotes default setting): 1. PNP
† / NPN output2. Normally Open operation
† / Normally Closed 3. Job light ON solid
† / Job light flashing4. Job light input high
† / Job light input low Construction Black painted aluminum housing; acrylic lenses; thermoplastic polyester end caps; thermoplastic elastomer programming switch cover; stainless steel mounting brackets and hardware Environmental Rating NEMA 2; IEC IP62 Connections 5-conductor PVC-jacketed 2 m cable which is either unterminated or terminated with a 5-pin Euro-style quick-disconnect connector, depending on model. Cable diameter is 3.3 mm. See page 382. Operating ConditionsTemperature: 0° to +50° C Relative humidity: 90% relative humidity @ 50° C (non-condensing) Certifications Hookup Diagrams MI25 (p. 498)
MEASUREMENT & INSPECTION

348

More i nformat i on onl i ne at

bannereng i neer i ng . com