Surecross Wireless I/O Network - BANNER ENGINEERING - #9

/ 12


catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
Pages:


See other catalogues for BANNER ENGINEERING

Text version of the page
More information online at bannerengineering.com Specialty Sensor DX80 Nodes • These Nodes are available with Temperature I/O factory-calibrated either for thermocouples, RTDs or the temperature and relative humidity serial sensors • The FlexPower thermocouple Node accommodates 13 different types of thermocouple, the customer selects the type using integrated dip switches • The M-GAGE FlexPower Node has an integrated sensor that detects the presence of vehicles FlexPower Temperature DX80 Node Model* Frequency Base I/O Data Sheet DX80N9X2S2N2T 900 MHz IP67 Thermocouple: Three inputs, one thermistor CJC input Discrete: Two selectable inputs, two NMOS sinking outputs 131297 DX80N2X2S2N2T 2.4 GHz DX80N9X2S2N2TC 900 MHz IP20 DX80N2X2S2N2TC 2.4 GHz DX80N9X2S0P0R 900 MHz IP67 RTD: Four three-wire inputs 131597 DX80N2X2S0P0R 2.4 GHz DX80N9X2S0P0RC 900 MHz IP20 DX80N2X2S0P0RC 2.4 GHz Serial DX80 Node Model* Frequency Base I/O Data Sheet DX80N9X2S2S 900 MHz IP67 One serial port to handle up to two serial sensors. 136971 DX80N2X2S2S 2.4 GHz DX80N9X1S1S 900 MHz One serial port to handle one serial sensor. Battery integrated into the housing 137322 DX80N2X1S1S 2.4 GHz * All Nodes on this page are available with internal antennas.To order the internal antenna models, replace the “S” in the 9th digit with a “W”. Internal antennas require an additional week for manufacture and shipping. For example, DX80N9X2S1S is the model number for the external antenna device and DX80N9X2W1S is the internal antenna device. Models with batteries integrated into the housing are so noted. For all other FlexPower models, the DX81 or DX81P6 Battery Supply Modules must be ordered separately to power these devices from battery. Greenhouse Temperature and Humidity Monitoring DX80N2X2S2N2TC DX80N2X2S2N2TC DX81 M-GAGE™ DX80 Nodes The M-GAGE Nodes are powered by a 3.6V lithium D cell integrated into the housing. The M-GAGE Node senses the presence/absence of vehicles. Model Frequency Base I/O Data Sheet DX80N9X1W0P0ZR 900 MHz Standard IP67 M-GAGE sensor with an internal antenna and a battery integrated into an easy to embed Node housing 147116 DX80N2X1W0P0ZR 2.4 GHz DX80N2X1W0P0ZR FlexSensor Serial Models T30UFDNCQ Discrete, ultrasonic, 3 m range M12FTH1Q Temperature and relative humidity sensor ±2% M12FTH2Q Temperature and relative humidity sensor ±3.5% QS30WEQ (emitter) QS30WRQ (receiver) Photoelectric pair up to 100' range T30U Tank Level Control

pageCatalog pdf di En 2012-05-22-28