S18 Series Laser Emitters - BANNER ENGINEERING - #1

Text version of the page

Printed in USA 10/07 P/N 35749 rev. D S186ELD(Q) Laser Diode Emitter Class 1 Laser for Use With Banner Modulated Photoelectric Receivers WARNING . . . Not To Be Used for Personnel Protection Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death. These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection. Features • Self-contained Class 1 modulated visible laser diode emitters permit higher gain and extended range in opposed mode sensing systems • Narrow effective beam for small-object detection or for precise position control • 10 to 30V dc operation; third wire extinguishes laser light when connected to +V dc • Compatible with all EZ-BEAM® receivers; may also be used with a variety of other Banner modulated photoelectric receivers (see Excess Gain chart below) • Popular 18 millimeter threaded barrel design Models Model Range Cable* Supply Voltage Effective Beam at Receiver at 25° C S186ELD Range varies, depending on which receiver is used (see Excess Gain chart, page 2). 2 m (6.5') Unterminated 10 to 30V dc Opposed Distance 1.5 m (5') 3 m (10') 6 m (20') 15 m (50') 30 m (100') Beam Width 4 mm (0.2") 5.5 mm (0.2") 8.5 mm (0.3") 18 mm (0.7") 32 mm (1.3") S186ELDQ 4-wire Euro-style QD connector * 9 m cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., S186ELD W/30). A model with a QD connector requires a mating cordset; see page 4. LISTED Excess Gain Excess Gain of the S186ELD emitter is dependent on the receiver used. Following is a comparison of the excess gain for recommended receivers at 15 m (50'). For information on compatibility of the S186ELD emitter with other Banner photoelectric receivers, contact the factory Applications Group at the address or numbers listed on the back cover. MULTI-BEAM® MAXI-BEAM® VALU-BEAM® EZ-BEAM® MINI-BEAM® ECONO-BEAM® Others Excess Gain at 15 m (50') SBRX1 3,000 RSBR 750 SMW95R 5,000 T18SN6R 400 SM31R 300 SE61R 45 SM51RB 140 SBR1 3,000 RSBRSR 120 SMI91RQD 3,000 T30SN6R 400 SM31RL 1,700 SE61RMHS 40 Q23SN6R 25 SBRXD1 3,000 S12SN6R 400 SM31RMHS 200 Q10AN6R 20 SBRD1 3,000 SM31RLMHS 1,100 Q45BB6R 1,500