QC50 Series True Color Sensors - BANNER ENGINEERING - #1

Text version of the page

Printed in USA 01/04 P/N 111523 rev. B QC50 Series True Color Sensor Compact, self-contained, three-output color-differentiating sensor Features • Two versions for application flexibility: QC50 models for most applications, andQCX50 models for more challenging applications • Compact, self-contained design • Analyzes and compares color to color, or varying intensities of one color • QCX50 models excel in challenging applications, such as differentiating dark bluefrom black • Fast sensing response time – QC50 models: 335 microseconds QCX50 models: 5 ms (reduced resolution setting – 1 ms) • Easy-to-set programming options for 1, 2, or 3 colors • Three programming parameters: channel, sensing mode, and tolerance level • 10 tolerance levels to allow for product variation • Output OFF-delay (6 options); selection applies to all three color channels • Gate mode option (also called inhibiting, synchronization or windowing) Models * Mating cable required; see page 7 for cable options Models SensingRange Cable/Connector* SensingResponse Time Supply Voltage Output Type QC50A3P6XDWQ 20 mm (0.8") typical; varies according to sensor configuration 8-pin Euro-style (M12) swivel QD connector 335 ìs 10 to 30V dc PNP, 3 channels QC50A3N6XDWQ NPN, 3 channels QCX50A3P6XDWQ Selectable5 ms or 1 ms PNP, 3 channels QCX50A3N6XDWQ NPN, 3 channels WARNING . . . Not To Be Used for Personnel Protection Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death. These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection. !