Q60 Adjustable-Field Series - BANNER ENGINEERING - #1

Text version of the page

Q60AF Sensors Long-Range Self-Contained Adjustable-Field Sensors Printed in USA 06/02 P/N 67003 rev. B Q60AF Adjustable-Field Features • Long-range adjustable-field background suppression sensor detects objects within a defined sensing field, while ignoring objects located beyond the sensing field cutoff • Two-turn, logarithmic adjustment of sensing field cutoff point from 0.2 to 2 m; allows easy setting of cutoff point at long range • Rotating pointer indicates relative cutoff point setting • Easy push-button or remote programming of light/dark operate and output timing; continuous status indicators verify all settings at a glance • Output ON and/or OFF delays adjustable from 8 milliseconds to 16 seconds • Powerful infrared sensing beam • Tough ABS/polycarbonate blend housing is rated IEC IP67; NEMA 6 10-30V dc Models (Q60BB6AF): • Powered by 10 to 30V dc; bipolar (one NPN and one PNP) outputs • Available with integral cable or rotating Euro-style quick-disconnect fitting Universal Voltage Models (Q60VR3AF): • 12-250V dc or 24-250V ac, 50/60 Hz • Available with integral cable or rotating Micro-style quick-disconnect fitting Infrared, 880 nm Q60 Adjustable-Field Models * 9 meter cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., Q60BB6AF2000 W/30). A model with a QD connector requires a mating cable; see page 8. Q60BB6AF2000 50 mm to 125 mm (2" to 5") depending on cutoff point setting 5-wire 2 m (6.5') 10-30V dc Bipolar NPN/PNP 1 10 100 .10 m .33 ft 1.0 m 3.3 ft 10 m 33 ft .01 m .033 ft EXCESS GAIN DISTANCE 1000 10000 Q60AF Models Minimum Range Cable* Supply Voltage Output Type Excess Gain at 200 mm Cutoff Adjustable: 200 mm to 2000 mm (8" to 80") Cutoff Point 1 10 100 .10 m .33 ft 1.0 m 3.3 ft 10 m 33 ft .01 m .033 ft EXCESS GAIN DISTANCE 1000 10000 Q60AF Excess Gain at 2000 mm Cutoff Q60BB6AF2000Q 5-pin Euro-style QD WARNING . . . Not To Be Used for Personnel Protection Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death. These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection. ! Q60VR3AF2000 5-wire 2 m (6.5') Universal Voltage 12-250V dc or 24-250V ac E/M Relay (SPDT), normally closed and normally open contacts Q60VR3AF2000Q1 4-pin Micro-style QD E/M Relay (SPST), normally open contact