PicoDot PD45 Series - BANNER ENGINEERING - #1

Text version of the page

PD45 Series PicoDot® Printed in USA 10/03 P/N 115700 Polarized Retroreflective and Convergent Laser Sensors Features • Compact and lightweight; ideal for use on robotic end effectors • Class 2 laser diode light source. • Convergent beam models have precise, high-energy sensing spot at focus, available in four focal lengths: 50 mm (2"), 100 mm (4"), 200 mm (8"), and 300 mm (12"). • Retroreflective models have precise, narrow beam; excellent for sensing the presence of tiny parts at close range, small parts at medium ranges and for accurate sensing over long distances. • Fast, 0.2 millisecond sensing response for high-speed sensing or counting. • 10 to 30V dc operation; choice of NPN (sinking) or PNP (sourcing) complementary solid state output. • Choose models with 2 m (6.5') or 9 m (30') unterminated cable, or with 150 mm (6") Euro-style pigtail quick-disconnect (QD) connector Retroreflective-Mode Models P Visible Red; Class 2 laser; 650 nm Excellent for applications where high sensing power and small beam size are important. Operates over sensing ranges typically accomplished only by conventional opposed-mode photoelectrics; uses a special filter to polarize the emitted light, filtering out unwanted reflections from shiny objects. * 9 m (30') cables are available by adding the suffix “W/30” to the model number of any cabled sensor (e.g., PD45VN6LLP W/30). Models with QD connectors require an optional mating cable; see page 6. ** Tested using a BRT-36x40BM retro target (included with each sensor). Actual range depends on the efficiency and size of the retroreflective target used. Some targets have produced ranges up to 39.6 m (130'); see page 8. Models Range** Cable* Supply Voltage Output Type Excess Gain Performance based on BRT-36X40BM retro target PD45VN6LLP 0.2 to 10.6 m (8" to 35') 2 m (6.5') cable 10-30V dc NPN PD45VN6LLPQ 5-pin QD 150 mm (6") pigtail PD45VP6LLP 2 m (6.5') cable PNP PD45VP6LLPQ 5-pin QD 150 mm (6") pigtail WARNING . . . Not To Be Used for Personnel Protection Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death. These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection. ! 1 10 100 1.0 m 3.3 ft 10 m 33 ft 100 m 330 ft 0.1 m 0.33 ft 1000 EXCESS GAIN DISTANCE Retroreflective PicoDot with BRT-36X40BM NOTE: CE certification applies to all models except PD45V..C300 Series